Its not a version thing - I have just check and it seems to work with Digiface, the error seems to be hdsp9652 specific...
Justin On Fri, 2003-03-07 at 14:28, Paul Davis wrote: > >> >ok, I am trying to test Paul's patch on the HDSP9652, but I cant get it > >> >to play anything. I applied it to 0.9.0rc8b, but aplay just returns > >> > >> which PCM device are you using? > > > >plughw:0,0 > > > >(hw:0,0 gives the same error though. It should play 26 channels shouldnt > >it) > > works here with the current HDSP driver but older ALSA CVS: > ---------------------------------------------------------------------- > paul[21]>cat /proc/asound/cards > 0 [card0 ]: TRID4DWAVENX - Trident TRID4DWAVENX > Trident TRID4DWAVENX PCI Audio at 0xe400, irq 10 > 1 [card1 ]: RME9652 - RME Digi9652 (Rev 1.5) > RME Digi9652 (Rev 1.5) at 0xfd000000, irq 11 > 2 [hdsp ]: H-DSP - Hammerfall DSP > RME Hammerfall DSP + Digiface at 0xfebe0000, irq 14 > paul[22]>sync > paul[23]>sync > paul[24]>sync > paul[25]>aplay -D plughw:1 /usr/local/music/cdstage/corner.wav > Playing WAVE '/usr/local/music/cdstage/corner.wav' : Signed 16 bit Little Endian, > Rate 44100 Hz, Stereo > Aborted by signal Interrupt... > paul[26]>aplay -D plughw:2 /usr/local/music/cdstage/corner.wav > Playing WAVE '/usr/local/music/cdstage/corner.wav' : Signed 16 bit Little Endian, > Rate 44100 Hz, Stereo > Aborted by signal Interrupt... > > > > > > > > > > > ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
