I finally got the modules to compile and work. make-3.79 gave me a
headache to install last night, but I got it in.
I built the snd-opti92x-ad848 module and attempted to use it:
isapnp configures the card as :
gate:/lib/modules/2.2.24/misc# isapnp /etc/isapnp.conf
Board 1 has Identity 1f 08 00 00 00 24 09 14 3e: OPT0924 Serial No
134217728 [checksum 1f]
OPT0924/134217728[0]{Pro Audio 16 }: Ports 0x220 0x130 0x380;
IRQ7 DMA0 DMA1 --- Enabled OK
OPT0924/134217728[1]{Game Port }: Port 0x201; --- Enabled OK
OPT0924/134217728[2]{MPU401 }: Port 0x300; IRQ5 --- Enabled
OK
/etc/isapnp.conf:263 -- Warning - resource conflict allocating IRQ5 (see
/etc/isapnp.conf)
OPT0924/134217728[5]{OPT924 }: Port 0x30D; IRQ5 --- Enabled
OK
(with or without MPU401 enabled and that shared IRQ is the same. anyway,
I got no more spare irqs...)
a modprobe snd-opti92x-ad1848 gives Device or resource busy.
I tried to give it the parameters as isapnp=1, same.
I gave it all the parameters with all settings as set by isapnp tool,
same.
Then, on a hunch, I gave changed the port from 220 to 530 (as I
remembered this was the port it used to run on under windows as WSS)
I did:
modprobe snd-opti92x-ad1848 isapnp=1 port=0x220 mpu_port=0x300
fm_port=0x380 irq=7 mpu_irq=5 dma1=0
and the module loaded ok!
I tried to play some sound file and I get :
# aplay daffy12.wav
Playing WAVE 'daffy12.wav' : Unsigned 8 bit, Rate 11025 Hz, Mono
aplay: pcm_write:1025: write error: Input/output error
--
ing. Andrei Boros
mailto:[EMAIL PROTECTED] / +40-21-303-1870
Centrul pt. Tehnologia Informatiei
Societatea Romana de Radiodifuziune
-------------------------------------------------------
This SF.net email is sponsored by: Tablet PC.
Does your code think in ink? You could win a Tablet PC.
Get a free Tablet PC hat just for playing. What are you waiting for?
http://ads.sourceforge.net/cgi-bin/redirect.pl?micr5043en
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
