Hi gurus, I'm seeing this weird problem in current cvs (same problem when tested with cvs of 20030307):
Connections: Oxygen8 Midi output -> Quattro Midi input Quattro USB -> laptop USB port - start computer (with everything connected) a) usb system is loaded..., Quattro recognized, snd-usb-audio started b) alsasound loads the rest of the modules --> midi input does not work (tested with pd) This is the only way I have found to make it work (after MANY tries): - stop alsa driver (/etc/rc.d/init.d/alsasound stop) - disconnect Quattro from the usb port - disconnect Oxygen8 from the Quattro <- this is what makes a difference - connect Quattro to the usb port (wait till it is recognized) - start alsa driver --> midi input works! Apparently having active sensing midi bytes coming in to the Quattro while the driver is being loaded kills input. I was not able to make things work if the keyboard is connected to the interface when alsa starts. A MidiSport2x2 works fine under the same conditions (using the open source firmware). It is not affected by the same Oxygen8 keyboard being plugged in when the driver starts. -- Fernando ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
