i'm trying to get a rme hdsp 9652 to work, and have bad results:
loading snd-hammerfall-mem and snd-hdsp works fine, starting jack or some alsa-playback too (or at least seems to).
but when i start alsamixer or alsactl and want to unmute the channels i get massive xruns and no sound, sometimes a kernel panic.
i tried a pentium3- and a amd-duron system and ran into the same behavior.
the card worked for the previous owner, but i have no windows-system to test it there.
has anybody had similar expiriences or any hints for me? regards d13b
my setup: rme hdsp 9652 with adi8-ae interface kernel 2.4.20 (straight forward) latest alsa from cvs
cat /proc/asound/card0/hdsp gives me:
RME HDSP 9652 (Card #1) Buffers: capture d4000000 playback d3e00000 IRQ: 12 Registers bus: 0xeb000000 VM: 0xdc8a2000 Control register: 0x10080de Status register: 0x3400008 Status2 register: 0xffff8041 FIFO status: 0 MIDI1 Output status: 0xffffff00 MIDI1 Input status: 0xffffff38 MIDI2 Output status: 0xffffff00 MIDI2 Input status: 0xffffff38
Buffer Size (Latency): 8192 samples (2 periods of 32768 bytes) Hardware pointer (frames): 0 Passthru: no Line out: on Firmware version: 1
Sample Clock Source: Internal 48 kHz Preferred Sync Reference: ADAT1 AutoSync Reference: ADAT1 AutoSync Frequency: 44100 System Clock Mode: Master System Clock Frequency: 48000
IEC958 input: Internal IEC958 output: Coaxial only IEC958 quality: Consumer IEC958 emphasis: off IEC958 NonAudio: off IEC958 sample rate: Error flag set
ADAT1: Lock ADAT2: No Lock ADAT3: No Lock SPDIF: No Lock Word Clock: No Lock ADAT Sync: No Lock
------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
