> I can use amixer to set up things as per usual, and jack starts > normally. However, I get no sound whatsoever. > > Loading the firmware via Windows, rebooting, and setting up the card > identically with amixer *does* yield sound. > > So it looks like some critical parts for proper communication > to the multiface need the proper firmware to work with the rev > 0xb interface. > > Back to trying to load the proper rev11 firmware, it looks like > some part of the communication protocol must have changed, or > the multiface_firmware_rev11.dat is corrupt. I wonder if there > is any way to verify it. > > jlc
I did exactly the same test yesterday on a friend's rev 11 card. In fact there is sound, but all messed up. I got sound on output 3 from playback_15, on output 12 from playback_11, on output 9 from playback_3. I could check too that strictly nothing happens with the new firmware, which leads me to same conclusions. I'm trying to contact RME on this issue, the problem being I do not have Paul's contact address. I sent a mail yesterday to Matthias Carstens who's well known to all RME forum readers and I'm waiting for an answer. Thomas ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
