> I start the system. The red light on the Multiface is on. No sound > drivers are loaded yet. My modules.conf is as you see it. > > [EMAIL PROTECTED] jfm3]$ sudo hdsploader > hdsploader - firmware loader for RME Hammerfall DSP cards > Looking for HDSP + Multiface or Digiface cards : > Card 0 : RME Hammerfall DSP at 0xe9020000, irq 12 > Upload firmware for card hw:0 > Firmware uploaded for card hw:0 > Card 1 : >
Note thant you don't need to run hdsploader as root. If the hdsp appears as card 0, I suspect the modules get loaded at some point by some other mechanism. Did you tweak your init scripts ? > The red light goes out. I can get sound if I mess around with gamix and > amixer enough, although I still haven't figured out what all the numbers > mean. > > Shouldn't that be card 3 as the hdsp? In modules.conf I have the hdsp at > index 3. I don't understand exactly what the card "index" means. > > If I have snd-virmidi not commented out and follow the above procedure, > I get a kernel oops when I run hdsploader but otherwise the same > results. > I thought the maximum alsa snd_card_limit was 8, maybe I'm wrong ? That could explain the oops... Why do you use the -k flag with options ? Thomas ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps1 _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
