On Mon, 25 Aug 2003 12:59:37 +0200 Takashi Iwai <[EMAIL PROTECTED]> wrote:
> if aplay -vv shows the correct configuration and VU meters, It does. > i'd > suspect it's a hardware issue. i.e. mixer mutes or physical > connection. to check the card's playback without physical connection, > you can record via loopback like the following procedure: > > 1. choose "Mix" as the capture source. > 2. turn on "Capture" switch. > 3. raise "Capture" volume. > 4. adjust "PCM" and "Master" volumees and switches. > 5. play a file and record at the same time. > 6. check the recorded file I'm not really sure how to do all this but it does seem like a good debugging method. Could you be a little bit more explicit about how the above steps are carried out? > also, you can try to swap the card order, > > options snd-ens1371 index=1,0 Tired this, ran "update-modules" and restarted alsa. This changes the way that the two cards are listed in the /proc/asound/cards output but otherwise not much else changes. The same physical card that works before still works while the one that never worked still doesn't work. Erik -- +-----------------------------------------------------------+ Erik de Castro Lopo [EMAIL PROTECTED] (Yes it's valid) +-----------------------------------------------------------+ "Compiling C code with warnings switched off is like practicing high wire trapeze without a safety net. Even experienced practitioners try to avoid it." -- me ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
