Takashi Iwai wrote: ...
Unfortunately, the sound is playing too fast with plughw:0,1 as well.
please check /proc/asound/card1/pcm0p/sub0/hw_params during playback.
vdr:~ # head /proc/asound/card?/pcm?p/sub?/hw_params ==> /proc/asound/card0/pcm0p/sub0/hw_params <== closed
==> /proc/asound/card0/pcm1p/sub0/hw_params <== access: RW_INTERLEAVED format: S16_LE subformat: STD channels: 2 rate: 44100 (44100/1) period_size: 1024 buffer_size: 8192 tick_time: 10000
if it shows 44100, perhaps spdif configuration doesn't match with the request one. please check the spdif status in /proc/asound/card/ac97#0, too.
vdr:~ # head -99 /proc/asound/card?/ac97#0 0-0/0: Realtek ALC650 rev 0
Capabilities : DAC resolution : 20-bit ADC resolution : 18-bit 3D enhancement : Realtek 3D Stereo Enhancement
Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=1 LDAC SDAC CDAC DSA=0 SPDIF DRA VRA Extended status : SPCV LDAC SDAC CDAC SPDIF=7/8 SPDIF VRA PCM front DAC : 44100Hz PCM Surr DAC : 44100Hz PCM LFE DAC : 44100Hz PCM ADC : 48000Hz SPDIF Control : Consumer PCM Copyright Category=0x2 Generation=1 Rate=44.1kHz
you can overwrite the default pcm in ~/.asoundrc with '!' prefix. for example,
pcm.!default "hw:0,1"
That syntax did not work. It gives me the error message: ALSA lib pcm.c:1787:(snd_pcm_open_conf) Invalid type for PCM default definition (id: default, value: hw:0,1)
I changed it to
pcm.!default {
type hw
card 0
device 1
}Should that have the same effect? At least I can now omit the -d parameter for alsaplayer and the sound is still coming out of the SPDIF output (still too fast, though, see above). I can also control the volume via alsaplayer's slider. However, the alsamixer volume control has no effect and kde desktop sounds (i.e. typing ^G) do not work. As I am not really using the analog output, it would be fine with me to simply delete/deactive/hide the analog output PCM device, so the SPDIF output becomes the only PCM device and everything (including the OSS emulation) works with it. Is there a way to do that?
Carsten.
P.S.: I am still trying to update to the latest CVS, but I keep getting the error message: cvs [update aborted]: end of file from server (consult above messages if any) I will keep trying and report any news on the loop-through as soon as I have successfully installed the latest CVS version.
------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
