At Thu, 11 Sep 2003 08:40:30 +0200, Denis Sbragion wrote: > > Hello Takashi, > > At 19.59 10/09/2003 +0200, you wrote: > ... > > > 2) I use 'alsamixer'. Works fine. One problem: When I set the > > > conversion rate to the SPDIF clock (it has another name IEC...) IT > > > LOCKS AND STAYS THERE. No amount of diddling in 'alsamixer' yields > > > anything. To get around this I revert back to an older setting (it is > > > a long process) saved with 'alsactl' after a reboot. While I have > > > learned my lesson (DON'T DO THAT!), the behavior is not too good. > > > >ok, that's easy. please apply the patch attached. > ... > > is this problem somewhat related to the SPDIF problem I found with my > TerraTec EWX 24/96? I haven't been able to solve it, but, to tell the true, > I haven't tried really hard. Just digged a little in the source code. > Actually I'm still running with 0.9.4 plus the cs8427 module from 0.9.3.
likely, no. this bug was on only ice1724, not ice1712. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
