On Thursday 23 October 2003 04:14, you wrote:
> Juan Linietsky wrote:
> > The ens1371 driver takes a joystick_port parameter with range 1..8
> > but that same parameter is them put into a switch to detect io port
> > values like 0x200, 0x208, etc. so the joystick will never be detected.
>
> ens1370.c says:
> MODULE_PARM(joystick_port, "1-" __MODULE_STRING(SNDRV_CARDS) "i");
> MODULE_PARM_DESC(joystick_port, "Joystick port address.");
> MODULE_PARM_SYNTAX(joystick_port, SNDRV_ENABLED
> ",allows:{{0},{0x200},{0x208},{0x210},{0x218}},dialog:list");
>
> The range 1..8 means that it's possible to specify a parameter value
> for each of the up to 8 cards (SNDRV_CARDS is defined as 8). The
> parameter itself takes the correct values.
>
>
> Regards,
> Clemens
this is still not very helpful, as modinfo -p only returns:
joystick_port int array (min = 1, max = 8), description "Joystick port
address."
how are you supposed to know that you can only enter 0x200,0x208,etc?
Specially when in the OSS driver you do:
modprobe es1371 joystick=1
and it works flawlessly
Regards
Juan Linietsky
-------------------------------------------------------
This SF.net email is sponsored by: The SF.net Donation Program.
Do you like what SourceForge.net is doing for the Open
Source Community? Make a contribution, and help us add new
features and functionality. Click here: http://sourceforge.net/donate/
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
