-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thursday 27 November 2003 21:08, Joachim Schiele wrote:
YEPEE! i got it working. it's as following: no i'm using the mc50 (midi sequencer of roland) as kind of 'midifilter' my new setup is: Q ----> MC 50 -------> PC -------> Q and this is perfecly working! can someone explain that? note: this wasn't working before! Q ------> PC -------> Q joachim > dear list members, > > =<problem>========================================================= > > i want to user the Q as masterkeyboard and muse as sequencer to record the > notes, but how? i can't get the Q working with the alsa midi through! > > how can i change my setup that working with the Waldorf Q as masterkeyboard > and the PC (midi through==1) as Master, so i can play the Q and record it! > > first my setup: > | Waldorf Q | -out----in-> PC -out----in-> | Waldorf Q| > > with either muse (midi trough set!) or this command: (dd > if=/dev/snd/midiC0D0 bs=1 of=/dev/snd/midiC0D0) > also note that "local off" is set on the Q so it can't trigger itselfe > locally, only over the midi wire trough the pc! > > when i play the Q, strange things happen: > -not every note is triggered (many don't get through) > -faster playing (5-10 fingers on keys on Q) get diffrent midi error like > sending cc or program changes like pitch up, change of midi port numbers, > suddenly other sounds appear. > -also strange sounds like sqeezing or very high never ending tones appear. > > i know that this is not a BUG of the Waldorf Q because it is working with > the MC 50 (hardware sequencer from roland) well! > > =<other stuff>========================================================= > if i set up the emu10k1 midiIN/OUT <-> muse (midi seq), > i can send midi-out perfectly form my pc <-> waldorf Q / MC 307 when i'm > playing with the virtual muse midi-keyboard! > > what i can do (what's working): > -can send sysex(dump) from waldorf Q successfully to PC (no faults) > -can receive every sysex i sent from my PC <-> Q > -can sent notes from muse to either the Q or MC 307 with success (virtual > keyboard of muse)! > > special: with midi trough=1 > -using this command: > (dd if=/dev/snd/midiC0D0 bs=1 of=/dev/snd/midiC0D0) > > it is working with the following setup: > | MC 307 | out----in> PC out----in> | MC 307 | > > and it's even working with hi midi bandwith usage of the MC 307! > > =<setup of alsa>========================================================= > > version of alsa i'm useing: > -1pre1 the latest source! > kernel: > -2.4.22 > soundcard: > -emu10k1 with 2-3m large midicable > > > # aconnect -l -i > client 0: 'System' [type=kernel] > 0 'Timer ' > 1 'Announce ' > Connecting To: 63:0 > client 64: 'Rawmidi 0 - EMU10K1 MPU-401 (UART)' [type=kernel] > 0 'EMU10K1 MPU-401 (UART)' > [EMAIL PROTECTED]:~$ aconnect -l -i -o > client 0: 'System' [type=kernel] > 0 'Timer ' > 1 'Announce ' > Connecting To: 63:0 > client 64: 'Rawmidi 0 - EMU10K1 MPU-401 (UART)' [type=kernel] > 0 'EMU10K1 MPU-401 (UART)' > client 65: 'Emu10k1 WaveTable' [type=kernel] > 0 'Emu10k1 Port 0 ' > 1 'Emu10k1 Port 1 ' > 2 'Emu10k1 Port 2 ' > 3 'Emu10k1 Port 3 ' > > # lsmod > snd-seq-oss 28928 0 (autoclean) (unused) > iptable_filter 1772 0 (autoclean) (unused) > ip_tables 14976 1 [iptable_filter] > sd_mod 11084 0 (autoclean) > snd-pcm-oss 38244 0 > snd-seq-midi 4000 0 (unused) > snd-mixer-oss 13360 1 [snd-pcm-oss] > snd-emu10k1-synth 4764 0 (unused) > snd-emu10k1 73348 1 [snd-emu10k1-synth] > snd-pcm 59780 0 [snd-pcm-oss snd-emu10k1] > snd-hwdep 5248 0 [snd-emu10k1] > snd-page-alloc 6228 0 [snd-emu10k1 snd-pcm] > snd-ac97-codec 46484 0 [snd-emu10k1] > snd-emux-synth 27676 0 [snd-emu10k1-synth] > snd-util-mem 1280 0 [snd-emu10k1 snd-emux-synth] > snd-seq-midi-emul 4960 0 [snd-emux-synth] > snd-seq-virmidi 3272 0 [snd-emux-synth] > snd-seq-midi-event 3328 0 [snd-seq-oss snd-seq-midi snd-seq-virmidi] > snd-seq 36400 2 [snd-seq-oss snd-seq-midi > snd-emux-synthsnd-seq-midi-emul snd-seq-virmidi snd-seq-midi-event] > snd-timer 14436 0 [snd-pcm snd-seq] > snd-rawmidi 13600 0 [snd-seq-midi snd-emu10k1 snd-seq-virmidi] > snd-seq-device 4256 0 [snd-seq-oss snd-seq-midi > snd-emu10k1-synth snd-emu10k1 snd-emux-synth snd-seq snd-rawmidi] > snd 32484 0 [snd-seq-oss snd-pcm-oss snd-seq-midi > snd-mixer-oss snd-emu10k1 snd-pcm snd-hwdep snd-ac97-codec snd-emux-synth > snd-util-mem snd-seq-virmidi snd-seq-midi-event snd-seq snd-timer > snd-rawmidi snd-seq-device] > > [EMAIL PROTECTED]:~$ cat /proc/asound/devices > 1: : sequencer > 0: [0- 0]: ctl > 4: [0- 0]: hardware dependent > 8: [0- 0]: raw midi > 19: [0- 3]: digital audio playback > 26: [0- 2]: digital audio capture > 25: [0- 1]: digital audio capture > 16: [0- 0]: digital audio playback > 24: [0- 0]: digital audio capture > 9: [0- 1]: raw midi > 10: [0- 2]: raw midi > 33: : timer > > [EMAIL PROTECTED]:~$ cat /proc/asound/cards > 0 [Live ]: EMU10K1 - Sound Blaster Live! > Sound Blaster Live! (rev.4) at 0xc000, irq 9 > > [EMAIL PROTECTED]:~$ cat /proc/asound/seq/drivers > snd-emu10k1-synth,loaded,1 > snd-seq-midi,loaded,1 > snd-seq-oss,loaded,requested,1 > [EMAIL PROTECTED]:~$ cat /proc/asound/seq/oss > OSS sequencer emulation version 0.1.8 > ALSA client number 63 > ALSA receiver port 0 > > Number of applications: 0 > > Number of synth devices: 1 > > synth 0: [Emu10k1] > type 0x1 : subtype 0x20 : voices 64 > capabilities : ioctl enabled / load_patch enabled > > Number of MIDI devices: 5 > > midi 0: [EMU10K1 MPU-401 (UART)] ALSA port 64:0 > capability read/write / opened none > > midi 1: [Emu10k1 Port 0] ALSA port 65:0 > capability write / opened none > > midi 2: [Emu10k1 Port 1] ALSA port 65:1 > capability write / opened none > > midi 3: [Emu10k1 Port 2] ALSA port 65:2 > capability write / opened none > > midi 4: [Emu10k1 Port 3] ALSA port 65:3 > capability write / opened none > > tnx in advice! > > if something is missing, i will mail it on request! > > sorry for my bad english! - -- gruss, joachim schiele -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/xnCOyzk1c1T5Os4RAv7eAJ438PoCnZPm/1Pb3NWO44WL8kcdnACfdwrJ XrMKUjx9OQmnvASk45FoYsk= =+qGj -----END PGP SIGNATURE----- ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
