On Mon, 2003-12-08 at 13:04, Sergey Vlasov wrote: > Most likely you need the dxs_support option instead of ac97_clock. > > With dxs_support=2 the sound should work fine, but the hardware mixing > capability will be disabled. Then you can try dxs_support=1 or > dxs_support=4. > > By default snd-via82xx uses dxs_support=3 (except for certain known > motherboards), this makes only 48000 sampling rate available. The > ALSA library can perform resampling for ALSA apps, and the kernel OSS > emulation layer can do resampling for OSS apps, but the quality is > often not good.
Sergey, Thanks for sending me down this path. Definitely I'm getting better results now. I did find some things out though. Some may possibly be bugs: 1) On my system dxs_support=3 is NOT the same as not setting dxs_support at all. With dxs_support not set I get horrible results. With dxs_support=3 I get reasonable to good results. 2) **ALL** applications I tried (alspalayer, gxine & xmms) are overdriving the audio path somewhere and causing distortion. The output level from the motherboard is not hot. In fact, even when the apps are up full the output level is actually down about 12-15db from where I'd like it, but I'm getting lots of distortion. When I reduce alsaplayer's level the distortion mostly goes away, although I'm left with considerable background hiss. In all cases I monitored the return level and it never causes my inputs to clip. (This level difference may be a pro equipment/consumer equipment issue.) 3) With dxs_support=1 I get very bad sounding results. It appears that there is a bug in the ADC setting. PCM ADC is set to 48K. I think this is the mode I would really like to use if PCM ADC was set to 44.1K, but as it is it sounds terrible. dxs=2 is not very good, and dxs=3/4 are both pretty good. All modes have a lot of hiss compared to my HDP 9652 and outboard D/A. (Expected...) cat /proc/asound/card0/codec97#0/ac97#0-0 dxs=1 dxs=2 dxs=3/4 <SNIP> PCM front DAC : 44100Hz 22050Hz 48000Hz PCM Surr DAC : 44100Hz 22050Hz 48000Hz PCM LFE DAC : 44100Hz 22050Hz 48000Hz PCM ADC : 48000Hz 22050Hz 48000Hz SPDIF Control : 44.1kHz 44.1kHz 48000Hz Sound Quality: BAD!! not good Good So, I am currently using Mode 4 and getting pretty good results, although I think Mode 1 would be even better for me if the PCM ADC was set to the right value. Cheers, Mark ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel