At Mon, 19 Jan 2004 10:55:39 -0000,
<[EMAIL PROTECTED]> wrote:
>
> [1 <text/plain; iso-8859-1 (quoted-printable)>]
>
> [2 <text/html; iso-8859-1 (quoted-printable)>]
> Hello:
>
> Over the past few days I have been trying to set up a SB Live 5.1 Card on my SuSE 9.0
> - 2.4.21 system to work with a set of Philips Analogue 5.1 speakers....
>
> So far I have not had any luck in getting these to work - as the centre/digital
> output
> seems to always be digital even though I have specified analogue and also I cannot
> seem to get the satellite (back) speakers to work. Thus the centre speaker
> constantly produces a horrible crackling sound ..
there is a mixer switch "SB Live Analog/Digital Output Jack", which
you can find at the right side (after scrolling) on alsamixer.
turn it off via 'M' key.
or, run
% amixer 'SB Live Analog/Digital Output Jack' off
then you'll get analog signals from the center jack.
when you play the digital signals (e.g. via xine), it will turn on the
digital mode automatically, and reset it when closed.
Takashi
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
