On Thu, 2004-01-22 at 14:02, Tommi Sakari Uimonen wrote: > > Thanks for the tip. I tried your suggestion, but it doesn't work for > > me. My .asoundrc now has this in it: (snip)
> It should be -D maudio_spdif, so lose the plug: and it will work. I think > the analog should also work without plug. Thanks! That did it, mostly... I now can play sound through the SPDIF! The analog doesn't work without "plug", I get an error "aplay: set_params:827: Sample format non available". I think it's because the 2496 driver only does 24bit, so 16bit pcm requires translation. But that's not a problem - plug works fine. The one problem is I still can't play different wave files simultaneously through the two outputs. If I start "aplay -D maudio_spdif 12.wav &" and then try to do "aplay -D plug:maudio_analog 11.wav" at the same time, the second one just blocks until the first one is done. This is unfortunate, since I'd really like to be able to run two-room sound from my computer into different amplifiers and speakers. I'm sure there's a way to do it, since the hardware is capable of it... -- Torrey Hoffman <[EMAIL PROTECTED]> ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
