At Thu, 05 Feb 2004 00:08:18 +0100, Joern Nettingsmeier wrote:
[crossposted to alsa-devel and jackit-devel]
[removed jackit-devel from cc:]
hi *!
i'd like to use the rear outs of my sblive platinum with jack.
the following works:
# aplay some.wav -Dfront &
# aplay someother.wav -Drear
both signals end up at my mixer as expected, so it seems the devices are independent.
front is hw:0,0 which is a duplex device. rear is hw:0,3 and is playback only.
hmm? hw:0,3 isn't for the rear output...
not?
then what is it?
and is hw:0,0 a four-channel out, two channel in device?
i've had this card for a couple of years now, and i still don't understand a fraction of it...
is the relationship of in and out jacks, mixer strips and alsa devices documented somewhere?
regards,
jörn
-- "I never use EQ, never, never, never. I previously used to use mic positioning but I've even given up on that too." - Jezar on http://www.audiomelody.com
Jörn Nettingsmeier Kurfürstenstr 49, 45138 Essen, Germany http://spunk.dnsalias.org (my server) http://www.linuxaudiodev.org (Linux Audio Developers)
------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
