Here is another questions (to make it easier):
7) How do I do accomplish this using an asoundrc file? I can't even figure that out. I've got an SB Live! 5.1 (EMU10K1). How do I 'simply' setup 2 'streams' (not sure I'm using the correct terminology). The first stereo 'stream' would output to the front L/R speakers at 25kHz. This first stream would only require an input 'wav' file of 2 channels (stereo). The second 'stream' would output to the rear L speaker at 22050Hz. This second would only require an inpt 'wav' file of 1 channel (mono).
I mean under OSS this is so simple! Open /dev/dsp at 25kHz and open
/dev/dsp1 at 22050Hz. Unfortunately, I cannot get the routing to work
reliably under OSS which is why I'm attempting the world of ALSA.
use:
hw:0,0
hw:0,1They should be seperate subdevices for that card.
-- Patrick Shirkey - Boost Hardware Ltd. Http://www.boosthardware.com Http://www.djcj.org/LAU/guide/ - The Linux Audio Users guide Http://www.djcj.org/gigs/ - Gigs guide Korea ========================================
Apparently upon the beginning of the barrage, the donkey broke discipline and panicked, toppling the cart. At that point, the rockets disconnected from the timer, leaving them strewn around the street. Tethered to the now toppled cart, the donkey was unable to escape before the arrival of U.S. troops.
United Press International Rockets on donkeys hit major Baghdad sites
By P. MITCHELL PROTHERO Published 11/21/2003 11:13 AM
------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
