The good news: you don't have a driver problem! But it sounds like you have a Wordclock problem. Namely, your rme 9632 has a different clock than your playback device (D/A) and they are not in Sync. Check the setting for who is (and should be) Wordclock Master and take adjust accordingly. You can set the mode of synchronisation for you card by editing /etc/asound.state and the running "alsactl restore".

-joachim

Ed Wildgoose wrote:


You can also simulate this simply by turning up the mixer controls so that normal music starts to clip. Same effect.




At risk of creating noise. Further experimentation shows that you need to set the output levels to +4db in hdspconf for this crackling to occur. So in fairness this could really be an overdriven output...?

The -10dbv output level is significantly quieter than any other equipment that I own (I know it's what they call consumer output device level, but still...)

Ed W


------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel


--
Joachim Deguara                         Email: [EMAIL PROTECTED]
Fraunhofer IDMT, Langewiesener St. 22, 98693 Ilmenau, Germany
Phone: +49 3677/69-4851                 Fax:   +49 3677/69-4399


------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel

Reply via email to