Nikhil Deo wrote: > It is to be done on QNX By now, QNX's API is completely different.
> I need to capture input from the mic AND the line in. This will work only if your hardware supports this. Many sound cards can select exactly one input for recording. > Then I need to output the mic input on the Right-LineOut and > leftLineIn on leftLineOut. (right line in can be ignored) This is easy once you have captured the data. Another possibility would be to configure the mixer to route the inputs as you want them. Again, this is dependent on the capabilities of your hardware/drivers. > in 2, my mixer group was input gain and although it seemed to be recording > something, I could not figure out what it was. How do I make it take the input > from mic in only? In ALSA, most cards have a mixer control "Capture Source" which allows to select between several input. Some cards have "Capture Volume" controls for each input and mix all together. HTH Clemens ------------------------------------------------------- This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th! http://www.thinkgeek.com/freeshipping/?cpg=12297 _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
