On Mon, May 31, 2004 at 05:45:24PM +0200, JoDaY wrote:
Hi all,
I've 2 install of linux, the first one is the oldest where hotplug
is able to load firmware when I plug a Tascam us-122.
But if I use snd-usb-usx2y.o (seen in depmod), hotplug is not able to load the right firmware... The usb led is not lightened :(
Sounds like you are using the old tascam-loader instead of usx2yloader. Have you installed both usx2yloader parts (in alsa-tools and alsa-firmware)?
You're right, the one which is able to load the firmware and make the LED of the card lighting is an old version.
I've tried to change it with alsa-tools and alsa-firmware:
- snd-usb-usx2y module is loading when I plug the us-122 card
- I can see "Bus 002 Device 008: ID 1604:8007 Tascam US-122 Audio/Midi Interface" with lsusb
But the usb LED is always off :(
I can also see : [USX2Y ]: USB US-X2Y - TASCAM US-X2Y TASCAM US-X2Y (1604:8007 if 0 at 002/008) in /proc/asound/card
Is the LED off normal ? Am I near of the goal ? :)
Thanks you lot !
Jo
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
