I'm trying to install the alsa-driver package. I've made it to the
modprobe step, and can't seem to figure out which driver I need.
I'm running a Gateway Solo 2500, which uses a NeoMagic with the Yamaha OPL
chipset. Currently, I load the driver at boot-up with the following:
/sbin/modprobe mpu401
/sbin/modprobe ad1848
/sbin/modprobe opl3sa2 io=0x370 mss_io=0x530 mpu_io=0x330 irq=5 dma=0
dma2=1
/sbin/modprobe opl3 io=0x388
In my /lib/modules/2.4.6/misc, there are the following:
snd-card-opl3sa2
snd-card-ad1848
snd-card-nm256
I'm about 100% positive the nm256 isn't correct. However, I can't get the
opl3sa2 or ad1848 to work:
# /sbin/modprobe snd-card-opl3sa2 io=0x370 mss_io=0x530 mpu_io=0x330 \
irq=11 dma=0 dma2=1
/lib/modules/2.4.6/misc/snd-card-opl3sa2.o: invalid parameter parm_io
/lib/modules/2.4.6/misc/snd-card-opl3sa2.o: insmod
/lib/modules/2.4.6/misc/snd-card-opl3sa2.o failed
/lib/modules/2.4.6/misc/snd-card-opl3sa2.o: insmod snd-card-opl3sa2 failed
# /sbin/modprobe snd-card-opl3sa2
/lib/modules/2.4.6/misc/snd-card-opl3sa2.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
/lib/modules/2.4.6/misc/snd-card-opl3sa2.o: insmod
/lib/modules/2.4.6/misc/snd-card-opl3sa2.o failed
/lib/modules/2.4.6/misc/snd-card-opl3sa2.o: insmod snd-card-opl3sa2 failed
Any thoughts would be appreciated. Thanks!
--
____) ,_)
(-(__ -|- _ _
____) | (/_\/(/_
(
_______________________________________________
| http://www.exitwound.org is offline. |
| but http://www.exitwound.org:1024 seems to |
| work. |
_______________________________________________
| Silence is the only virtue you have left. |
_______________________________________________
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
