Interesting, my envy24control in the Monitor Mixer section shows "Digital Mixer" with a "Reset peaks" button, PCM Out 1 through 10, H/W In 1 through 8 and S/PDIF in L and R.
In the Patchbay/Router Section I can only see two columns named "S/PDIF" with checkbuttons underneath "PCM Out", "Digital Mix", "S/PDIF In" twice, and "H/W In 1" through 8. Nowhere can I see anything saying "H/W Out". I wonder whether the envy24control window display is distorted so that only part of the tabs can be seen? I suppose that among the visible items some "L" and "R" specifications are not being displayed as well. Andreas James Tappin wrote: >On Wednesday 31 October 2001 1:41 pm, Andreas von Heydwolff wrote: > >>The envy24control mixer shows nice activity when I play some file with >>mpg123 or aplay but I can still hear nothing. >>What would you suggest now? >> > >You probably have your outputs set to play the hardware inputs, you need >to set them to either PCM or DIgital Mixer. This can be done in >envy24control, using the patchbay/router tab. > >For my Audiophile I normally set HW Out 1 to Digital mixer L and HW Out 2 >to DIgital Mixer R. For the 44 it's probably a bit more complicated as >there are more channels, but IIRC envy24control provides the right number >of outputs according to the card it finds. > >James > _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
