Looks like you have a win modem. The driver for that is closed source but you can find it on the web at
http://www.linmodems.org/ It is a fairly straightforward procedure. [EMAIL PROTECTED] wrote: > > Don't know if this is the right place. > Here is a printout of lspci -vvx on my HP 8670C computer. > 600 MHZ Pentium III > Has an added TV card, 70 GBytes of hard drives and 348 MBytes of RAM, and > a new CDR/RW drive > SuSE Linux 7.3 cannot detect my soundcard or modem, otherwise is > fantastic. > > Bud Bohling > Retired EE > [EMAIL PROTECTED] > > ------------------------------------------------------------------------ > 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 42) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort+ >SERR- <PERR+ > Latency: 0 > Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 1.0 > Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x2 > 00: 06 11 91 06 06 00 90 a2 42 00 00 06 00 00 00 00 > 10: 08 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 > > 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] >(prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort+ >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > Memory behind bridge: df000000-e07fffff > Prefetchable memory behind bridge: e1f00000-e3ffffff > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 06 11 98 85 07 00 30 22 00 00 04 06 00 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 01 01 00 e0 d0 00 00 > 20: 00 df 70 e0 f0 e1 f0 e3 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 08 00 > > 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 12) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping+ SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 0 > 00: 06 11 96 05 87 00 00 02 12 00 01 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a >[Master SecP PriP]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping+ SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 > Region 4: I/O ports at d800 [size=16] > 00: 06 11 71 05 87 00 80 02 06 8a 01 01 00 20 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 08) (prog-if 00 [UHCI]) > Subsystem: Unknown device 0925:1234 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32, cache line size 08 > Interrupt: pin D routed to IRQ 9 > Region 4: I/O ports at d400 [size=32] > 00: 06 11 38 30 17 00 00 02 08 00 03 0c 08 20 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 d4 00 00 00 00 00 00 00 00 00 00 25 09 34 12 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 04 00 00 > > 00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 20) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > 00: 06 11 50 30 00 00 80 02 20 00 00 06 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:09.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02) > Subsystem: Hauppauge computer works Inc. WinTV/GO > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 (4000ns min, 10000ns max) > Interrupt: pin A routed to IRQ 9 > Region 0: Memory at e1000000 (32-bit, prefetchable) [size=4K] > 00: 9e 10 6e 03 06 00 80 02 02 00 00 04 00 20 80 00 > 10: 08 00 00 e1 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 eb 13 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 10 28 > > 00:09.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02) > Subsystem: Hauppauge computer works Inc. WinTV/GO > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 (1000ns min, 63750ns max) > Interrupt: pin A routed to IRQ 9 > Region 0: Memory at e0800000 (32-bit, prefetchable) [size=4K] > 00: 9e 10 78 08 06 00 80 02 02 00 80 04 00 20 80 00 > 10: 08 00 80 e0 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 eb 13 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 04 ff > > 00:0a.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10) > Subsystem: Hewlett-Packard Company: Unknown device 9207 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 (8000ns min, 16000ns max) > Interrupt: pin A routed to IRQ 9 > Region 0: I/O ports at d000 [size=256] > Region 1: Memory at de800000 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA >PME(D0-,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 13 11 11 12 07 00 90 02 10 00 00 02 00 20 00 00 > 10: 01 d0 00 00 00 00 80 de 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 07 92 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 09 01 20 40 > > 00:0b.0 Multimedia audio controller: Rockwell International: Unknown device 4310 > Subsystem: Risq Modular Systems, Inc.: Unknown device 4310 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at b800 [size=64] > Capabilities: [40] Power Management version 1 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA >PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 7a 12 10 43 07 00 90 02 00 00 01 04 00 20 80 00 > 10: 01 b8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 35 12 10 43 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00 > > 00:0b.1 Communication controller: Rockwell International: Unknown device 4311 > Subsystem: Risq Modular Systems, Inc.: Unknown device 4311 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 32 > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [40] Power Management version 1 > Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA >PME(D0-,D1-,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 7a 12 11 43 07 00 90 02 00 00 80 07 00 20 80 00 > 10: 00 00 00 de 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 35 12 11 43 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00 > > 00:0b.2 Input device controller: Rockwell International: Unknown device 4312 > Subsystem: Risq Modular Systems, Inc.: Unknown device 4312 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 0 > Region 0: Memory at dd800000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 1 > Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA >PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 7a 12 12 43 07 00 90 02 00 00 80 09 00 00 80 00 > 10: 00 00 80 dd 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 35 12 12 43 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 00 00 > > 01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15) (prog-if >00 [VGA]) > Subsystem: Asustek Computer, Inc.: Unknown device fffe > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- ><MAbort- >SERR- <PERR- > Latency: 64 (1250ns min, 250ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at e2000000 (32-bit, prefetchable) [size=32M] > Expansion ROM at e1ff0000 [disabled] [size=64K] > Capabilities: [60] Power Management version 1 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA >PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [44] AGP version 2.0 > Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2 > Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> > 00: de 10 2c 00 07 00 b0 02 15 00 00 03 00 40 00 00 > 10: 00 00 00 df 08 00 00 e2 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 fe ff > 30: 00 00 ff e1 60 00 00 00 00 00 00 00 0b 01 05 01 -- Patrick Shirkey - Boost Hardware Ltd. Http://www.boosthardware.com - For the discerning hardware connoisseur. http://www.boosthardware.com/LAU/Linux_Audio_Users_Guide/ ======================================================================= _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
