>>I have the same problem with my winfast 6x. >>I think it's not about the a new chip revision but >>the implementation of Leadtek..
> I doubt it. My card is a 'trust'. Besides there is little to implement > as everything is in one chip. I'm suspecting it is a dependency on but there are one interesting thing: the chip is on serveral customer soundcards/mainboards and here are three people (you, me and Johannes Schoeller) with this problem (and nobody else ???) and all of us got a Leadtek Winfast 6x ... and it seems the Leadtek Winfast 4x (the 4 channel version) is working fine how Carsten Koch describes it in his AC3-howto http://www.linuxdvb.tv/documentation/ac3sound.html but in my case, it's not a real problem for me(!) if the digital output works with the S16->U16 patch analog can go to hell ;-) so the (still unsolved) AC3 (SPDIF-raw) problem is more frustrating to me... or depends it on the patch ???? however here are my listings: > Alsamixer says it is a > Card: C-Media PCI CMI8738-MC6 C-Media PCI CMI8738-MC6 > lspci -vvv gives: > 00:08.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) > Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (500ns min, 6000ns max) > Interrupt: pin A routed to IRQ 12 > Region 0: I/O ports at cc00 [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- lspci -vvv 02:09.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at b800 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2- ,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Then, in proc/asound, a cat sndstat shows: > Card config: > C-Media PCI CMI8738-MC6 (model 55) at 0xcc00, irq 12 cat sndstat Card config: C-Media PCI CMI8738-MC6 (model 55) at 0xb800, irq 9 > cd to card0 and a cat cmipci shows: > C-Media PCI > > 00: 02 00 00 00 > 04: 00 0c 00 00 > 08: 03 00 29 00 > 0c: 00 00 00 08 > 10: c0 00 00 00 > 14: 00 00 a0 00 > 18: 00 00 00 04 > 1c: 00 00 fe ff > 20: 10 40 00 00 > 24: 00 cb ff 02 > 28: ff ff ff ff > 2c: ff ff ff ff > 30: 00 00 00 00 > 34: 00 00 00 00 > 38: 00 00 00 00 > 3c: 00 00 00 00 cat cmipci: C-Media PCI 00: 00 00 00 00 04: 40 00 00 00 08: 00 00 29 00 0c: 00 00 00 08 10: c0 00 00 00 14: 00 00 a0 00 18: 00 00 00 00 1c: cc ff ff ff 20: 10 40 80 00 24: 00 31 00 04 28: ff ff ff ff 2c: ff ff ff ff 30: 00 00 00 00 34: 00 00 00 00 38: 00 00 00 00 3c: 00 00 00 00 (whatever it means ;-) -- _ _ (o)--(o) /.______.\ \________/ ./ \. ( . , ) \ \_\\//_/ / ~~ ~~ ~~ (see it with monospaced font) Uwe Weissbach, Leipzig mail: [EMAIL PROTECTED] pgp: send mail with "pgp-request" in subject -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS/CC/IT d- s+:- a C++(+++) UL++> P L+> E- W+++ N+ o-- K- w O- M !V-- PS+ PE+ Y+ PGP++ t+ 5@ X? R tv- b++(+++) DI-? D---- G++ e* h---- r- y++ ------END GEEK CODE BLOCK------ _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
