I have been trying to get sound on my RH 7.2 system for about six weeks. �
Downloaded alsa-driver-0.5.12a, � alsa-lib-0.5.10b, and alsa-utils-0.5.10. �
Untarred, unzipped, ./configure make, make install. 
�
Driver went alright. �After ./configure in the alsa-lib directory, I did 
"make" and got some errors I don't understand. Error messages are at the end 
of this email. http://www.linuxnewbie.org/nhf/intel/hardware/yamaha_alsa.html 
says that the alsa driver download is all that is needed and that the lib and 
util downloads are not required so I continued.
�
Went ahead and finished the sound installation. �Have no sound except for 
very weak sound when using cdplayer. �The box is dual booted and sound works 
great with win98, so no hardware problems. �Several references say alsa 
installs with mute on and to unmute with the mixer. �aumix doesn't come up at 
all and sound mixer says 'invalid mixer "unknown" '
�
The box is SiS M810 with Athlon 800MHz, built-in trident sis7018 sound. �
Running KDE2. �Contents of modules.conf, part of /proc/pci, and lsmod are 
below. 

I sure would appreciate some serious help.
bruce

/var/log/messages shows:
Mar 31 16:00:47 bertha modprobe: modprobe: Can't locate module sound-slot-1
Mar 31 16:00:47 bertha modprobe: modprobe: Can't locate module 
sound-service-1-0
Mar 31 16:00:47 bertha modprobe: modprobe: Can't locate module sound-slot-1
Mar 31 16:00:47 bertha modprobe: modprobe: Can't locate module 
sound-service-1-0
�
This is in modules.conf 
�
# ALSA native device support 
alias char-major-116 snd 
options snd snd_major=116 snd_cards_limit=1 
alias snd-card-0 snd-trident 
options snd-card-interwave snd_index=0 snd_id="SiS 7018" 
�
# OSS/Free setup 
alias char-major-14 soundcore 
alias sound-slot-0 snd-card-0 
alias sound-service-0-0 snd-mixer-oss 
alias sound-service-0-1 snd-seq-oss 
alias sound-service-0-3 snd-pcm-oss 
alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss �
#----------> end add to /etc/conf.modules 
�
This is from lsmod 3/30/02 
�
snd-pcm-oss 19104 0 (autoclean) (unused) snd-pcm-plugin 17840 0 (autoclean) 
[snd-pcm-oss] sd_mod 11640 0 (autoclean) ide-cd 27040 0 (autoclean) cdrom 
28672 0 (autoclean) [ide-cd] snd-mixer-oss 4832 0 (autoclean) [snd-pcm-oss] 
snd-trident 15296 0 (autoclean) (unused) snd-pcm 31776 0 (autoclean) 
[snd-pcm-oss snd-pcm-plugin snd-trident] snd-timer 8416 0 (autoclean) 
[snd-pcm] snd-ac97-codec 24032 0 (autoclean) [snd-trident] snd-mixer 24584 0 
(autoclean) [snd-mixer-oss snd-trident snd-ac97-codec] snd-mpu401-uart 2576 0 
(autoclean) [snd-trident] snd-rawmidi 10048 0 (autoclean) [snd-mpu401-uart] 
snd-seq-device 3884 0 (autoclean) [snd-trident snd-rawmidi] snd 34752 0 
(autoclean) [snd-pcm-oss snd-pcm-plugin snd-mixer-oss snd-trident snd-pcm 
snd-timer snd-ac97-codec snd-mixer snd-mpu401-uart snd-rawmidi 
snd-seq-device] soundcore 4452 0 (autoclean) [snd] 
�
/proc/pci 
Bus �0, device � 1, function �4: 
� � Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI 
Audio 
Accelerator (rev 2). 
� � � IRQ 11. 
� � � Master Capable. �Latency=64. �Min Gnt=2.Max Lat=24. 
� � � I/O at 0xcc00 [0xccff]. 
� � � Non-prefetchable 32 bit memory at 0xcfffd000 [0xcfffdfff]. 
�
This is the end of message after make for alsa-lib errored out: 
make[1]: Entering directory 
`/usr/src/linux-2.4.7-10/alsa-lib-0.5.10b/include' make[1]: Leaving directory 
`/usr/src/linux-2.4.7-10/alsa-lib-0.5.10b/include' 
Making all in src make[1]: Entering directory 
`/usr/src/linux-2.4.7-10/alsa-lib-0.5.10b/src' 
Making all in control make[2]: Entering directory 
`/usr/src/linux-2.4.7-10/alsa-lib-0.5.10b/src/control' /bin/sh ../../libtool 
--mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include 
-g -O2 -c cards.c 
rm -f .libs/cards.lo gcc -DHAVE_CONFIG_H -I. -I. -I../../include 
-I../../include -g -O2 -c -fPIC -DPIC cards.c -o .libs/cards.lo gcc 
-DHAVE_CONFIG_H -I. -I. -I../../include -I../../include -g -O2 -c cards.c -o 
cards.o >/dev/null 2>&1 
mv -f .libs/cards.lo cards.lo ../../libtool: line 4058: 19383 Segmentation 
fault $run $mv $libobj $lo_libobj 
make[2]: *** [cards.lo] Error 139 make[2]: Leaving directory 
`/usr/src/linux-2.4.7-10/alsa-lib-0.5.10b/src/control' 
make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory 
`/usr/src/linux-2.4.7-10/alsa-lib-0.5.10b/src' 
make: *** [all-recursive] Error 1 
[root@bertha alsa-lib-0.5.10b]# 

_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to