Ok,
I have a dvd-rom drive that i have connected the digital out (2-pin) to
the cd-in connection on the RME9636. I am sure that the hardware is
corrected properly.
However I get no sound when playing cds in XMMS or DVDs in Xine. Paul
Davis thought that you could to connect this to a cd-rom drive output,
but i have called a few vendors and the believe this is not the case.
Therefore I am convinced that there is a setting in asound.state that I
need to set, but I'm not sure what it is.
Here are my asound/state settings:
state.card0 {
control.1 {
comment.access 'read write'
comment.type IEC958
iface PCM
name 'IEC958 Playback Default'
value
'0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.2 {
comment.access 'read write inactive'
comment.type IEC958
iface PCM
name 'IEC958 Playback PCM Stream'
value
'0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.3 {
comment.access read
comment.type IEC958
iface MIXER
name 'IEC958 Playback Con Mask'
value
'3b00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.4 {
comment.access read
comment.type IEC958
iface MIXER
name 'IEC958 Playback Pro Mask'
value
'1f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.5 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 ADAT1
comment.item.1 Coaxial
comment.item.2 Internal
iface PCM
name 'IEC958 Input Connector'
value Internal
}
control.6 {
comment.access 'read write'
comment.type BOOLEAN
iface PCM
name 'IEC958 Output also on ADAT1'
value false
}
control.7 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 AutoSync
comment.item.1 Master
comment.item.2 'Word Clock'
iface PCM
name 'Sync Mode'
value AutoSync
}
control.8 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 'IEC958 In'
comment.item.1 'ADAT1 In'
comment.item.2 'ADAT2 In'
iface PCM
name 'Preferred Sync Source'
value 'ADAT1 In'
}
control.9 {
comment.access 'read write'
comment.type BOOLEAN
iface PCM
name 'Channels Thru'
value.0 false
value.1 false
value.2 false
value.3 false
value.4 false
value.5 false
value.6 false
value.7 false
value.8 false
value.9 false
value.10 false
value.11 false
value.12 false
value.13 false
value.14 false
value.15 false
value.16 true
value.17 true
}
control.10 {
comment.access read
comment.type INTEGER
comment.range '0 - 96000'
iface PCM
name 'IEC958 Sample Rate'
value -1
}
control.11 {
comment.access read
comment.type ENUMERATED
comment.item.0 'No Lock'
comment.item.1 Lock
comment.item.2 'No Lock Sync'
comment.item.3 'Lock Sync'
iface PCM
name 'ADAT1 Sync Check'
value 'No Lock'
}
control.12 {
comment.access read
comment.type ENUMERATED
comment.item.0 'No Lock'
comment.item.1 Lock
comment.item.2 'No Lock Sync'
comment.item.3 'Lock Sync'
iface PCM
name 'ADAT2 Sync Check'
value 'No Lock'
}
control.13 {
comment.access read
comment.type ENUMERATED
comment.item.0 'No Lock'
comment.item.1 Lock
comment.item.2 'No Lock Sync'
comment.item.3 'Lock Sync'
iface PCM
name 'ADAT3 Sync Check'
value 'No Lock'
}
control.14 {
comment.access read
comment.type BOOLEAN
iface PCM
name 'Timecode Valid'
value false
}
control.15 {
comment.access 'read write'
comment.type BOOLEAN
iface PCM
name Passthru
value false
}
control.16 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 ADAT1
comment.item.1 Internal
iface PCM
name 'ADAT1 Input Source'
value ADAT1
}
doing a proc /proc/asound/card0/rme9652 i get :
RME Digi9636 (Rev 1.5) (Card #1)
Buffers: capture dec00000 playback dea00000
IRQ: 5 Registers bus: 0xd4000000 VM: 0xe0d5a000
Control register: 800f
Latency: 8192 samples (2 periods of 32768 bytes)
Hardware pointer (frames): 0
Passthru: no
Clock mode: autosync
Pref. sync source: ADAT1
ADAT1 Input source: ADAT1 optical
IEC958 input: Internal
IEC958 output: Coaxial only
IEC958 quality: Consumer
IEC958 emphasis: off
IEC958 Dolby: off
IEC958 sample rate: error flag set
ADAT Sample rate: 44100Hz
ADAT1: No Lock
ADAT2: No Lock
ADAT3: No Lock
Timecode signal: no
Punch Status:
1: off 2: off 3: off 4: off 5: off 6: off 7: off 8: off
9: off 10: off 11: off 12: off 13: off 14: off 15: off 16: off
17: on 18: on
ok what attracts me attention is that I have set the IEC958 (coax)
connection to internal, which i belive to be the cdrom connection. I'm
not sure what passthu is supposed to be set to.
Any ideas?
Bearcat
(further research
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
Sponsored by http://www.ThinkGeek.com/
