I am new to alsa Everything seems fine with my setup but, I when I try to capture on my rme32 I get this nasty bugger
[root@rme32 root]# ecasound -sr 48000 -i:alsa,hw:1,0 -o:test.wav **************************************************************************** * ecasound v2.0.4 (C) 1997-2001 Kai Vehmanen * **************************************************************************** (eca-chainsetup) Setting internal sample rate to: 48000 - [ Chainsetup/Enabling audio inputs ] ------------------------------------- ALSA lib pcm_hw.c:248:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed: Device or resource busy --- ERROR: [ECA-CHAINSETUP] : "Enabling chainsetup: AUDIOIO-ALSA3: Error when setting up hwparams: Device or resource busy" I'm quite sure I'ts NOT busy. i may be wrong While playing some noise into the spdif I figured a browse in /proc may be in order.. but honestly I do not know what I'm looking for.. ;( [root@rme32 root]# cat /proc/asound/card1/rme32 RME Digi32 (Rev. 192) at 0xfc000000, irq 11 (index #2) General settings receiver: CS8412 format: 16 bit, Stereo Input settings input: coaxial (2 channels) sample rate: 48000 Hz Output settings output signal: normal playback (muted) sample rate: 44100 Hz clock mode: master format: IEC958 (consumer) emphasis: off Looks like it knows my feed is there! [root@rme32 root]# cat /proc/asound/card1/pcm0c/sub0/status closed Not sure what "closed" means.. PLease please please... if anyone has a clue or can please point me in the "where to look" direction it would be most appericated.. phrog ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
