Fedor G. Pikus wrote: > If I use usb-uhci module for my USB controller, I get 2 PCMs, pcm0 > supports recording at 44.1KHz (arecord -f cd), and works fine. > pcm1 supports recording at 44.1KHz ok, and also at 48KHz, but when I try > that, I get this in the log: > usb-uhci.c: interrupt, status 2, frame# 1646 > ALSA ../alsa-kernel/usb/usbaudio.c:628: timeout: still 5 active urbs.. > usb_control/bulk_msg: timeout > usb.c: USB disconnect on device 4 > And after this I have no USB at all until reboot. USB mouse does not work, > nothing.
What Linux and ALSA version are you using? > If instead I use uhci module, I get only one PCM, pcm0, and it supports > 44.1KHz, and works fine. > > Why doesn't 48KHz work, and where are higher rates, where is 24bit > recording? These features should be available if the device has correct descriptors. Please post the output of lsusb. Regards, Clemens ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
