At 12.25 17/09/02, you wrote: >At 11.56 16/09/02, you wrote: >>I'm using an RME9652 under SuSE 8.0 (recompiled kernel with lowlatency >>and alsa 0.9 from the distro, beta12 I think). >>I'm using successfully CSound with the 8 channel analog output >>daughterboard. Now I need to record. >I've succedeed in recording setting the "ADAT1 Sync" option inside gamix >from "ADAT1" to "Internal". >This way I can record, but during playback samples play faster (at wrong >sample rate?) >Anyone knows anything about this issue?
The solution is turning "Sync mODE" option in gamix to "Master" instead of "AutoSync". Also don't forget to set "ADAT1 Input" to "Internal". I've also set "IEC958 " to "internal" and "Sync Source" to "IEC958in". There's still an issue however :))) Now arecord won't record (it outputs instead a pulsing noise). Probably a command line problem (I didn't inspect this too much because I need it to work in CSound). I'd like to have some information of what I can make with ~/.asoundrc. Hope this helps you as much as it helped me. Thanks Luca Corti Studio Azzurro Produzioni s.r.l. Via Davanzati 5 20158 Milano, ITALY Ph +39 02 39321331 fax +39 02 3760079 ------------------------------------------------------- Sponsored by: AMD - Your access to the experts on Hammer Technology! Open Source & Linux Developers, register now for the AMD Developer Symposium. Code: EX8664 http://www.developwithamd.com/developerlab _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
