Hello, i have a problem with my fm801 sound card. First of all everythig works right but: My problem is that i cannot use the ut2003_demo and teamspeak at the same time.I heard that this sould be possible with a multichannel capable soundcard. As far as i know my Terratec soundcard should be capable of that. I havent found a way to put it into multichannel mode.
The soundcard has the following data.
soundchip Fortemedia FM801-AU (it is written on the chip)
cat /proc/pci
Bus 0, device 13, function 0:
Multimedia audio controller: Fortemedia, Inc Xwave QS3000A [FM801]
(rev 178).
IRQ 3.
Master Capable. Latency=64. Min Gnt=4.Max Lat=40.
I/O at 0x1080 [0x10ff].
Bus 0, device 13, function 1:
Input device controller: Fortemedia, Inc Xwave QS3000A [FM801 game
port] (rev 178).
Master Capable. Latency=64. Min Gnt=4.Max Lat=40.
I/O at 0x1410 [0x141f].
according to the file alsa-driver-0.9.0rc3/alsa-kernel/pci/fm801.c lines
933-935 even the revision should fit.
pci_read_config_byte(pci, PCI_REVISION_ID, &rev);
if (rev >= 0xb1) /* FM801-AU */
chip->multichannel = 1;
i am using gentoo linux 1.2 kernel 2.4.19 from kernel.org
ls -al /dev/snd
drwxr-xr-x 1 root root 0 Jan 1 1970 .
drwxr-xr-x 1 root root 0 Jan 1 1970 ..
crw------- 1 main audio 116, 0 Jan 1 1970 controlC0
crw------- 1 main audio 116, 32 Jan 1 1970 controlC1
crw------- 1 main audio 116, 64 Jan 1 1970 controlC2
crw------- 1 main audio 116, 96 Jan 1 1970 controlC3
crw------- 1 main audio 116, 128 Jan 1 1970 controlC4
crw------- 1 main audio 116, 160 Jan 1 1970 controlC5
crw------- 1 main audio 116, 192 Jan 1 1970 controlC6
crw------- 1 main audio 116, 224 Jan 1 1970 controlC7
crw------- 1 main audio 116, 4 Jan 1 1970 hwC0D0
crw------- 1 main audio 116, 8 Jan 1 1970 midiC0D0
crw------- 1 main audio 116, 24 Jan 1 1970 pcmC0D0c
crw------- 1 main audio 116, 16 Jan 1 1970 pcmC0D0p
crw------- 1 main audio 116, 1 Jan 1 1970 seq
crw------- 1 main audio 116, 33 Jan 1 1970 timer
ls -al /dev/dsp*
lr-xr-xr-x 1 root root 9 Sep 28 12:41 /dev/dsp ->
/dev/dsp0
crw------- 1 main audio 14, 3 Sep 28 12:41 /dev/dsp0
crw------- 1 main audio 14, 19 Sep 28 12:41 /dev/dsp1
crw------- 1 main audio 14, 35 Sep 28 12:41 /dev/dsp2
crw------- 1 main audio 14, 51 Sep 28 12:41 /dev/dsp3
ls -al /proc/asound/card0/
dr-xr-xr-x 4 root root 0 Sep 28 17:53 .
dr-xr-xr-x 6 root root 0 Sep 28 17:53 ..
-rw-r--r-- 1 root root 0 Sep 28 17:53 ac97#0
-rw-r--r-- 1 root root 0 Sep 28 17:53 ac97#0regs
-r--r--r-- 1 root root 0 Sep 28 17:53 id
-r--r--r-- 1 root root 0 Sep 28 17:53 midi0
dr-xr-xr-x 3 root root 0 Sep 28 17:53 pcm0c
dr-xr-xr-x 3 root root 0 Sep 28 17:53 pcm0p
What do i miss ? Or have i understood something wrong ? Ist that
possible with my Soundcard.
Thanks in advance.
signature.asc
Description: This is a digitally signed message part
