Are u sure u compiled the driver with this option.
--with-cards=ac97
with cards is the chipset used and not the name of the card.
IE I have a Terratec 24/96 card that shows in lspci, but the chipset is ICE1712
also shown in lspci. Then I used --with-cards=ICE1712
"Pedro I. sanchez" <[EMAIL PROTECTED]> skrev:
Hello,
I'm running Debian 3.0 with kernel 2.4.18 and ALSA 0.9.0rc3 on an Intel
motherboard D815EFV. lspci reports the audio controller as 82820 820
(Camino 2) Chipset AC'97.
The ALSA modules seem to load fine, and I can run alsamixer to unmute
the channels. The problem is that I get no sound at all. For example:
# aplay /usr/share/sounds/info.wav
Playing WAVE '/usr/share/sounds/info.wav' : Signed 16 bit Little Endian,
Rate 44100 Hz, Mono
#
The system doesn't hang since I get the prompt back.
This is the contents of the ALSA portion of my modules.conf file:
alias char-major-14 soundcore
alias char-major-116 snd
options snd snd_cards_limit=1 snd_major=116
alias snd-card-0 snd-intel8x0
options snd-intel8x0 snd_id=CARD_0 snd_index=0
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-11 snd-mixer-oss
alias sound-service-0-12 snd-pcm-oss
These are the loaded modules:
# lsmod
Module Size Used by Tainted: P
snd-pcm-oss 36004 0 (autoclean)
snd-mixer-oss 9312 0 (autoclean) [snd-pcm-oss]
snd-intel8x0 10432 0
snd-pcm 58048 0 [snd-pcm-oss snd-intel8x0]
snd-timer 11040 0 [snd-pcm]
snd-ac97-codec 24304 0 [snd-intel8x0]
snd-mpu401-uart 2848 0 [snd-intel8x0]
snd-rawmidi 13024 0 [snd-mpu401-uart]
snd-seq-device 3808 0 [snd-rawmidi]
snd 26504 0 [snd-pcm-oss snd-mixer-oss
snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart
snd-rawmidi snd-seq-device]
nlvcard 1328 0 (unused)
mishim 296960 1
Also,
# cat /proc/asound/CARD_0/pcm0c/info
card: 0
device: 0
subdevice: 0
stream: CAPTURE
id: Intel ICH
name: Intel 82801BA-ICH2
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 1
(this says 82801BA-ICH2 as opposed to 82820 from lspci (?))
when I load the modules the following is written on the syslog:
Oct 1 21:37:56 allegro kernel: PCI: Found IRQ 6 for device 00:1f.5
Oct 1 21:37:56 allegro kernel: PCI: Sharing IRQ 6 with 00:1f.3
Oct 1 21:37:56 allegro kernel: PCI: Setting latency timer of device
00:1f.5 to 64
Oct 1 21:37:57 allegro kernel: intel8x0: clocking to 41159
I've been strugling with this for almost two weeks and I don't want to
give up (yet). I'd very much appreciate any help you can give me.
Thank you,
--
Pedro
-------------------------------------------------------
This sf.net email is sponsored by:TThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
Prøv betaversjonen av den nye Yahoo! Mail
Nytt design, enklere å bruke, alltid tilgang til Adressebok, Kalender og Notisbok
