[Alsa-user] Digital out with intel8x0 driver

[Arthur J. Yarwood]

I've been trying to get digital out to work with my onboard SIS7012 card using the intel8x0 drivers.
I'm running a stock Redhat7.3 setup (kernel 2.4.18-18.7.x), and have installed the ALSA drivers from tar balls (version 0.9.0rc6). The card detects as: Avance Logic ALC200/200P rev 0. I've got the digi out hooked up to my Cambridge Audio 2i DAC, which can accept anything up to 48KHz.

The setup works fine for analog out. But I can't get anything from the spdif out (works under windows fine). Using alsa mixer I crank up 'IEC958 Playback AC97-SPSA' and unmute the 'IEC958' channels, but I still get nowt through. Any ideas?

Here's some info from /proc/asound/SI7012/ac97#0

0-0/0: Avance Logic ALC200/200P rev 0

Capabilities : -headphone out-
DAC resolution : 18-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Stereo Enhancement

Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=1 AMAP DSA=0 SPDIF VRA
Extended status : SPDIF=res SPDIF VRA
PCM front DAC : 22050Hz
PCM ADC : 48000Hz
SPDIF Control : Consumer PCM Copyright Category=0x2 Generation=1 Rate=48kHz

You can find my /etc/asound.state at:-
http://fubaby.com/asound.state

Arthur Yarwood.




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user