Paul Winkler wrote: > I picked up an Oxygen today, and I seem to get as far as > getting the firmware loaded (via midisport_firmware) > and loading the snd-usb-audio module, > but I don't seem to be able to actually use it. > > Dec 8 00:50:27 kermit kernel: hub.c: USB new device connect on bus1/1, assigned >device number 5 > Dec 8 00:50:28 kermit kernel: usb.c: USB device 5 (vend/prod 0x763/0x1014) is not >claimed by any active driver. > Dec 8 00:50:31 kermit /etc/hotplug/usb.agent: Setup midisport_fw for USB product >763/1014/1 > Dec 8 00:50:31 kermit /etc/hotplug/usb.agent: Module setup midisport_fw for USB >product 763/1014/1 > Dec 8 00:50:31 kermit /etc/hotplug/usb/midisport_fw: load >/usr/share/usb/MidiSportKS.ihx for 763/1014/1 to /proc/bus/usb/001/005
There should now be messages about a disconnect and another new device connect. Maybe the firmware didn't get loaded properly. Please try to run the loader by hand, maybe there's an error message: /sbin/fxload -s /usr/share/usb/MidiSportLoader.ihx -I /usr/share/usb/MidiSportKS.ihx Regards, Clemens ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
