Dear Julien, Thanks for the reply. The channels on HDSP do not show up as master, pcm, line, etc. They show up as Chn,1 Chn,2, ... Chn,18 and I have set all of them to unity. I do get sound out from channels 1 though 8 through the analog output, and through the first two digital channels (Chnls 9 and 10), but I have not been able to get sound on digital channels 3 and above (Chnls 11 and above), and from Line Out.
Thanks, Shahrokh. On Sat, 14 Dec 2002, Julien Patrick Claassen wrote: > Hi! > Try to use alsamixer (it's an ncurses-based mixer). You can directly call it > from the commandline. With cursor right/left you can navigate from device to > device (master, line, pcm...). Check that master, pcm and line are unmuted at > the least. Then check if the volumes are adjusted correctly. Adjust the > volumes with up.down and unmute/mute with m. > Good luck, I hope this can help you a bit. > Kindest regards > Julien > > Julien Patrick Claassen > [EMAIL PROTECTED] > [EMAIL PROTECTED] > http://www.geocities.com/jjs_home > > SBS C-LAB > Fuerstenallee 11 > 33102 Paderborn > > Phone: (+49) 5251 60 6060 > Fax: (+49) 5251 60 6065 > > www.c-lab.de > ------------------------------------------------------- This sf.net email is sponsored by: With Great Power, Comes Great Responsibility Learn to use your power at OSDN's High Performance Computing Channel http://hpc.devchannel.org/ _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
