Hello all,
I just got a Gigabyte-7ZXE mobo with a VIA82686B chipset. The old board
I had was a Chaintech, with a VIA82686A and I got alsa to work perfectly
with it, even with 2 sound cards (a SB16 too).
I cannot seem to figure out why I am receiving this error after a
perfect build of the driver, libs, and tools v0.90rc6. I have tried
looking through the archives, but have come up with only one post that
seems like mine, but after trying what they said, no luck.
* Here is the error...
snd-via82xx /lib/modules/2.4.20/kernel/sound/pci/snd-via82xx.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
/lib/modules/2.4.20/kernel/sound/pci/snd-via82xx.o: insmod
/lib/modules/2.4.20/kernel/sound/pci/snd-via82xx.o failed
/lib/modules/2.4.20/kernel/sound/pci/snd-via82xx.o: insmod snd-via82xx
failed
* So, I get the IRQ from lspci -v...
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
Controller (rev 50)
Subsystem: Giga-byte Technology: Unknown device a002
Flags: medium devsel, IRQ 10
I/O ports at dc00 [size=256]
I/O ports at d800 [size=4]
I/O ports at d400 [size=4]
Capabilities: [c0] Power Management version 2
* And try again with this in my /etc/modules.conf (added the IRQ=10)...
alias char-major-116 snd
alias char-major-14 soundcore
options snd major=116 cards_limit=1
alias snd-card-0 snd-via82xx
options snd-via82xx index=0 id="AC97" irq=10
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
* And I get this...
snd-via82xx /lib/modules/2.4.20/kernel/sound/pci/snd-via82xx.o: invalid
parameter parm_irq
/lib/modules/2.4.20/kernel/sound/pci/snd-via82xx.o: insmod
/lib/modules/2.4.20/kernel/sound/pci/snd-via82xx.o failed
/lib/modules/2.4.20/kernel/sound/pci/snd-via82xx.o: insmod snd-via82xx
failed
Basically, I think it may be the IO settings, but I do not know the
correct format for the IRQ, nor the IO settings in the modules.conf file
(apparently). Some help would be appreciated. TIA.
--
Mike Duncan
[EMAIL PROTECTED]
http://www.randomtask.net
-------------------------------------------------------
This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will
allow you to extend the highest allowed 128 bit encryption to all your
clients even if they use browsers that are limited to 40 bit encryption.
Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
