On Sun, 23 Feb 2003 10:30:02 -0500
Adam Oliver <[EMAIL PROTECTED]> wrote:
> I compiled the alsa drivers with the following options
> --with-cards=cs4232
> --with-sequencer=yes
> --with-isapnp=yes
>
> I did the make and make install and also compiled and installed the libs
> and utils. The version is the 0.9.0rc7. I get the following message
> when I tried to modprobe snd-cs4232 and get the following message.
>
> bash-2.05a# modprobe snd-cs4232
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: init_module:
> No such device
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: Hint: insmod
> errors can be caused by incorrect module parameters, including invalid
> IO or IRQ parameters.
> You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: insmod
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o failed
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: insmod
> snd-cs4232 failed
>
> I also ran pnpdump -c to create the isapnp.conf file and then ran isapnp
> using that file. Any suggestions or things I might have missed? Thanks.
>
> Adam Oliver
In the subject it says cs4236 chipset, that needs the snd-cs4236 driver :)
HTH,
-Frans
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
