I /think/ I posted earlier, but mabye it didn't go through, i haven't gotten any
replies to date.
I'm running slack 8.1, trying to install alsa 0.9.x.
It doesnt' matter what package I get from the download page, or from CVS, I have the
same problem. I download the package(or CVS), and install in this order: Libs, Module,
and finally, Apps. No errors at all during the compilation process. I 'modprobe
snd-intel8x0' and the module loads without any errors (some messages are returned,
I'll get to that later). Now for the juicy part, when I got to use the alsa-utils to
unmute my sound card, every utility that I use segfaults right after it is started. A
gdb trace returns this output:
<snip>
[EMAIL PROTECTED]:~$ gdb amixer
GNU gdb 5.2
(gdb) run
Starting program: /usr/bin/amixer
[New Thread 16384 (LWP 2828)]
Cannot find user-level thread for LWP 2828: generic error
(gdb)
</snip>
I have no clue what that error means. I've been told that amixer doesn't use threads,
but I don't know.
A bit of info about my setup.
- lspci -
00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 01)
Subsystem: Cirrus Logic: Unknown device 5959
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at d800 [size=256]
I/O ports at dc80 [size=64]
- uname -a -
Linux dellerium 2.4.20 #3 Mon Dec 30 21:11:50 CST 2002 i686 unknown
That's all the info I can think of that would be pertanint at the moment..if anyone
needs any extra info, I'd be glad to oblige.
fuxxy
irc.gammaforce.org / #projectgamma
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
