Still only stereo. :( It just seemed to amplify the line in a bit more. Any more suggestions?
PTW My speakers are Analog 5.1 speakers not digital if this would make any difference David On Thu, 06 Mar 2003 19:12:11 -0800 Nehal <[EMAIL PROTECTED]> wrote: > set line-in volume to 0, and set it as recording/capture device, > then set ac97 volume to about 40-50, then u can control the volume > of line-in by setting the 'Capture' volume (IGain on oss mixer) > > this will also allow u to use bass/treble controls for line-in > > note that for some bizarre the pcm volume controls the line-in > volume as well, so u wanna set that to at least 90 > > this worked for me for analog output, i dont know about digital > output though.. > > Nehal > > David Hunt wrote: > > Hi All > > > > I have SB Live 5.1 card which has it's line in hooked up to a TV card > > but my problem is inputs such as line in, mic, cd audio are only > > stereo inputs so only come out my 2 front speakers. Is there any way > > to get it come out as "5.1". > > > > When I play stereo sound such as mp3's etc It comes out as "5.1" > > sound. > > > > So can I do something like > > > > line in -> 5.1 -> sound-card-output > > > > Thanks > > David > > > > > > ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
