On Friday 14 March 2003 02:15, Mirabella, Mathew J wrote: > All. > > I have been abel to get the audigy 2 card to work with emu10k1 but i have a > problem. I cannot seem to get multichannel sound and the volumes and > levels are pretty low. > > What I did was: > get the latest emu10k1from cvs > ensure that kernel sources are installed in the right place in /usr/src/ > find the right config file for the kernel modules in > /lib/modules/(kernelname)/configs and copy this one level up and name it > .config on the emu10k1 stuff do a make, then make again > then make install > then make tools > then make install-tools > edit the modules.conf file and put the lines > alias sound emu10k1 > alias sound-slot-0 emu10k1 > alias sound-slot-1 emu10k1 > reboot and sound was there. > i might hav had to do a emu-config -a at some stage. > > > I would also like to know what is sound-slot-0 and sound-slot-1. i.e. what > is the slot all about? and what are the scripts for in /usr/local/etc/ > relating to the emu10k1 and audigy? > > Any help would be appreciated. > > Mat.
You are using Creative's Open Source driver, not the ALSA one, see ftp://opensource.creative.com/pub/doc/live_faq.html Sound-slot-0 and sound-slot-1 refer to the first and second soundcard. HTH, -Frans ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
