Anyone got a working multi channel set up for this card with alsa?
I've got a cheap set of 5.1 speakers (Creative Inspire 5300) and using
the oss drivers and emu-tools I've managed to get all three output
channels (center/sub, front left/right, rear left/right) working like a
charm. This is in Redhat 9. I'm running gentoo right now, and had a
little trouble with the oss drivers and emu-tools there, so I'm trying
alsa (which seems to be recommended anyways). I've managed to get rear
channel support by tinkering with the mixer, but the center channel's
still dead (unless I unplug the center from the speaker, thereby letting
the speakers distribute the signal, but that's cheating . I'm not sure
if this is something I can setup with the mixer or if I need to play
with .asoundrc or one of the other config files. Failing this I can
switch back to the oss driver and probably get it working, but I figure
sooner or later I'll be switching to alsa; what with the 2.6 kernel and
all. Thanks again.
Jeremy Gregorio
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
