I have seen some people have
running SPDIF with a VIA686A Chipset and VT1612A Audiochip. What is todo to
enable the SPDIF?
I have a STB from Allwell
with the same Chipset and a SPDIF in and out onboard, but when I run alsamixer
no SPDIF options are seen and when I call
cat /proc/asound/card0/ac97#0
then comes the same output without any SPDIF entries.
In this thread I have see it
with SPDIF:
http://www.mail-archive.com/[EMAIL PROTECTED]/msg06628.html
# cat
/proc/asound/cards
0 [rev50 ]: VIA686A - VIA 82C686A/B rev50
VIA 82C686A/B rev50 at 0xdc00, irq 11
# cat /proc/asound/card0/ac97#0
0-0/0: VIA Technologies VIA1612A
Capabilities : -headphone out-
DAC resolution : 18-bit
ADC resolution : 18-bit
3D enhancement : Reserved 27
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=0 AMAP DSA=0 VRA
Extended status : VRA
PCM front DAC : 48000Hz
PCM ADC : 48000Hz
I have installed alsa-driver-0.9.4 alsa-lib-0.9.4 alsa-utils-0.9.4 with the
Installguide for via82xx from the ALSA-Website
Can
anyone help me, what I must do to become SPDIF?
Thank
You
Alwin
Esch
|
