I have just checked my BIOS configuration and my AC'97 controller was disabled!!! I don't know why it came disabled by default... But now that I enabled it, it's running perfectly... Sorry for bothering you all and thanks for the help!
On Wednesday 29 October 2003 12:01, Rafael Paoliello Guimaraes wrote: > I have checked with "lspci -vvv" as root and I couldn't find any mention of > a Multimedia Audio Controller, although my Motherboard's manual (Gigabyte > GA-8S648) tells me it's a Realtek ALC 655... Any help will be very > appreciated... Here is the result of the lspci: > > 00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0648 > (rev 02) > Subsystem: Silicon Integrated Systems [SiS]: Unknown device 0648 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort+ >SERR- <PERR- > Latency: 32 > Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M] > Capabilities: [c0] AGP version 3.0 > Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- > FW- > AGP3+ Rate=x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4 > > 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual > PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: e4000000-e5ffffff > Prefetchable memory behind bridge: d0000000-dfffffff > BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- > > 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 25) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 0 > > 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if > 80 [Master]) > Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B > step) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 128 > Region 4: I/O ports at f000 [size=16] > > 00:03.0 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB > Controller (rev 0f) (prog-if 10 [OHCI]) > Subsystem: Silicon Integrated Systems [SiS] SiS7001 USB Controller > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 32 (20000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at e7003000 (32-bit, non-prefetchable) [size=4K] > > 00:03.1 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB > Controller (rev 0f) (prog-if 10 [OHCI]) > Subsystem: Silicon Integrated Systems [SiS] SiS7001 USB Controller > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 32 (20000ns max), cache line size 08 > Interrupt: pin B routed to IRQ 11 > Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=4K] > > 00:03.3 USB Controller: Silicon Integrated Systems [SiS] SiS7002 USB 2.0 > (prog-if 20 [EHCI]) > Subsystem: Giga-byte Technology: Unknown device 5004 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 32 (20000ns max), cache line size 08 > Interrupt: pin D routed to IRQ 9 > Region 0: Memory at e7001000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > Subsystem: U.S. Robotics: Unknown device 00ff > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 32 (8000ns min, 16000ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at e800 [size=256] > Region 1: Memory at e7002000 (32-bit, non-prefetchable) [size=256] > Expansion ROM at <unassigned> [disabled] [size=128K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device > 5964 (rev 01) (prog-if 00 [VGA]) > Subsystem: PC Partner Limited: Unknown device 7c26 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 255 (2000ns min), cache line size 08 > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at d000 [size=256] > Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=64K] > Expansion ROM at <unassigned> [disabled] [size=128K] > Capabilities: [58] AGP version 3.0 > Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- > FW+ > AGP3+ Rate=x4,x8 > Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4 > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.1 Display controller: ATI Technologies Inc: Unknown device 5d44 (rev > 01) Subsystem: PC Partner Limited: Unknown device 7c27 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Latency: 32 (2000ns min), cache line size 08 > Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] > Region 1: Memory at e5010000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > On Wednesday 29 October 2003 09:31, Frans Ketelaars wrote: > > On Tuesday 28 October 2003 13:45, Rafael Paoliello Guimaraes wrote: > > > Hello Folks, > > > > > > I own a Gigabyte Motherboard that came with the Realtek ALC 655 sound > > > chipset. I have installed the alsa drivers (version 0.9.8) but I > > > still don't know how I should configure my modules.conf? Anybody can > > > help me??? > > > > > > Best regards, > > > > You can check with 'lspci' which Multimedia audio controller you have. > > If it's VIA8235 or something like that instructions are here: > > http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=VIA&car > >d= &chip=via8235&module=via82xx > > > > HTH, > > > > -Frans > > > > > > > > ------------------------------------------------------- > > This SF.net email is sponsored by: SF.net Giveback Program. > > Does SourceForge.net help you be more productive? Does it > > help you create better code? SHARE THE LOVE, and help us help > > YOU! Click Here: http://sourceforge.net/donate/ > > _______________________________________________ > > Alsa-user mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/alsa-user -- ============================================= Rafael Paoliello Guimaraes PhD Student - Computer Networking Group Department of Computer Architecture (DAC) Polytechnical University of Catalonia (UPC) Phone: +34-934017187 Fax: +34-934017055 ============================================= ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
