Hi,
I am having a problem with alsa and my SBLive. I have a system with two
cards - an SBLive and a Delta66. Things worked fine until I enabled the
HPT372 controller on my Abit KR7A133, now I get an error when I try
modprobe snd-emu10k1:
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
insmod
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o
failed
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
insmod snd-emu10k1 failed
I suspect an IRQ problem, but have moved the cards around and changed
IRQs in the bios, but to no avail. Here is my lspci -vv for the SBLive:
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
08)
Subsystem: Creative Labs CT4832 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at b000 [size=32]
Capabilities: <available only to root>
00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 08)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at b400 [size=8]
Capabilities: <available only to root>
And my cat /proc/interrupts.
CPU0
0: 47941 XT-PIC timer
1: 433 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 641 XT-PIC ide2
7: 2444 XT-PIC usb-uhci, usb-uhci, eth0
8: 1 XT-PIC rtc
10: 9 XT-PIC ICE1712
11: 37308 XT-PIC [EMAIL PROTECTED]:1:0:0
12: 21897 XT-PIC PS/2 Mouse
14: 32442 XT-PIC ide0
15: 10252 XT-PIC ide1
NMI: 0
ERR: 0
As you can see, the ICE1712 module works fine. I tried recompiling
(0.9.8), and there were no errors, but still the same problem when
trying the modprobe. I thought perhaps a conflict on IRQ5 with the ide2
(HPT372), and moved the cards around, but the ICE1712 ran fine sharing
that IRQ, and the emu10k1 still didn't load. I am running Fedora Core
1, but the problem also exists with Slackware 9.1 running on the same
machine. Does anyone have any suggestions? Thanks for any help.
Best Regards,
Scott
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
