Then you can use xmms with mplayer and aplay....all at same time (multiple mplayer, with xmms, and multiple aplay works too).
System Information: ==========
Card: nforce 2 Chip: Realtek ALC650 rev 3 Motherboard: Asus A7N8XE-Deluxe Alsa version: 1.0.3 Kernel: 2.4.18 Based System: RH9
Compile information ================
I compile and install alsa version 1.0.3 like this:
alsa-driver: ./configure --with-cards=intel8x0 --with-sequencer=yes; make; make install
alsa-lib: ./configure; make; make install
alsa-oss: ./configure; make; make install
alsa-utils: ./configure; make; make install
.asoundrc config file: ================
And my .asoundrc (in home dir) file is this:
##################################### ### .asoundrc for nforce2 apu
pcm.nforce-hw {
type hw
card 0
}pcm.!default {
type plug
slave.pcm "nforce"
}pcm.nforce {
type dmix
ipc_key 1234
slave {
pcm "hw:0,0"
period_time 0
period_size 1024
buffer_size 4096
}
}
#bindings { ==> with this options, doesn't work simultaneous sounds <===
#0 0 #1 1
#}
#}
ctl.nforce-hw {
type hw
card 0
}
#####################################Bye. ------------------------------------------------------------------------
Wade Nelson wrote:
I have my nforce2 mobo (mcp-t southbridge) set up to use dmix, and I can play aplay on 2 seperate consoles at once. However I cannot play aplay and another source, nor two other sources at once. Example: cannot play aplay & madplay simultaneously; aplay & XMMS doesn't work; XMMS & madplay do not work.... This seems to be no matter what settings or output I choose for those apps. I'm running kernel 2.6.3-mm3, with alsa intel8x0 driver compiled as modules, latest alsa-libs & alsa-utils, with OSS emulation, and everything is working perfectly except for this.
dmesg reports no problems, and aplay -v reports nothing strange. A 2nd source will simply wait for the first one to finish before playing.
My asoundrc:
pcm.nforce-hw { type hw card 0 }
pcm.!default { type plug slave.pcm "nforce" }
pcm.nforce { type dmix ipc_key 1234 slave { pcm "hw:0,0" period_time 0 period_size 1024 buffer_size 4096 rate 44100 } }
ctl.nforce-hw { type hw card 0 }
I had this problem on my Epox 8RDA+ (nf2), as well as my new DFI NF2 Ultra Infinity (nf2 also). Any suggestions/ideas/solutions?
------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
