Thanks for your reply.

What codec do you have? (see /proc/asound/card0/codec97#0/ac97#0-0)

/proc/asound/card0/codec97#0/ac97#0-0 :

0-0/0: SigmaTel STAC9750/51

Capabilities     : -headphone out-
DAC resolution   : 20-bit
ADC resolution   : 20-bit
3D enhancement   : SigmaTel 3D Enhancement

Current setup
Mic gain         : +0dB [+0dB]
POP path         : post 3D
Sim. stereo      : off
3D enhancement   : off
Loudness         : off
Mono output      : MIX
Mic select       : Mic1
ADC/DAC loopback : off
Extended ID      : codec=0 rev=1 AMAP DSA=0 SPDIF VRA
Extended status  : SPCV SPDIF=3/4 VRA
PCM front DAC    : 48000Hz
PCM ADC          : 48000Hz
SPDIF Control    : Consumer PCM Category=0x2 Generation=1 Rate=48kHz

What are the contents of /etc/asound.state after running
"alsactrl store"?
Please see attached file.

Thanks.



Regards,
Clemens




------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user


Regards

Gil Disatnik
UNIX system administrator.

[EMAIL PROTECTED]
http://gil.disatnik.com

_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
apt-get install slackware
--------------------------------------------------------------------
"Windows NT has detected mouse movement, you MUST restart
your computer before the new settings will take effect, [ OK ]"
--------------------------------------------------------------------
Windows is a 32 bit patch to a 16 bit GUI based on a 8 bit operating
system, written for a 4 bit processor by a 2 bit company which can
not stand 1 bit of competition.
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-

Attachment: asound.state
Description: Binary data



Reply via email to