allright - I tried it with kmix and afterwards the automatic mirroring wasn't there anymore. For some reason afterwards it worked with the ALSAmixer as well.. Strange ...
> Hej - I want to have a simply soundcard delaytest. > > I need an external soundsource as a reference signal. > > What I did was this : > > mono source to stereo source > > left channel directly to left channel of recording device > > right channel sent to ALSA-PC LineIn > > line out of PC sent to right channel of recording device > > > > The gap between the left and the right channel indicates the delay BUT the > ALSA PC sends the input directly bypassing the soundcard which is why I > measure a delay of 0 ms (same signal of course). > When I´m muting the capture channel the signal might get captured but I > doesn´t appear on the master anymore. > > So - I can't switch the monitoring off - now I'm using a Soundblaster MP3+ > USB soundcard which mirrors the input even when PCM and all other > (except > speaker) is lowered to zero. Can anyone help ??? > > > Thanks > > -- A l e x > > > > > > > > On Wed, Apr 14, 2004 at 02:57:40 +0200, "Alexander Carôt" wrote: > > > > You have to set which input you want to be recorded from. > > > > > > I attached a screenshot the mixer for my USB device is on. > > > > > > I want to have the input source signal on the left and the soundcard > > output > > > signal on the right or > > > both of them on one channel if I still canfigure out the delay. > > > > I've done it by running a loopback cable from the line out to the line > in. > > Then record one channle of the soundcard input and one channel of an > > jack client. > > > > eg: > > > > alsa_pcm:capture_1 ------------------> > > jack recorder > > -----------------------------> > > AMS > > ----------------------------------------> alsa_pcm:playback_1 > > > > Hope that makes sense > > > > - Steve > > > > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: IBM Linux Tutorials > Free Linux tutorial presented by Daniel Robbins, President and CEO of > GenToo technologies. Learn everything from fundamentals to system > administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click > _______________________________________________ > Alsa-user mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/alsa-user > ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
