Hello Frans.
http://www.alsa-project.org/alsa-doc/index.php3?vendor=vendor-ESS_Technology#matrixIt`s defenetily true. Thanks.
seems to suggest another driver for the solo 1. Maybe you should try alsaconf to set up your /etc/modules.conf.
I took a look in the driver source - es1938 must support es1969 (my card) and es1946.
With es1938 alsaconf succeeded to set some values in modules.conf.
All modprob`s succeeded.
The last problem - I don`t hear nothing.
When I run 'playmus boys_have.mp3', I get this message (silently):
"/tmp/mcop-arkadi is not owned by user".
If I change ownership of "/tmp/mcop-arkadi" - nothing changes (only message).
Note: my hardware is connected right - I tested it on Win2K.
From: Frans Ketelaars <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: Re: [Alsa-user] problem with snd-es1968 Date: Sat, 15 May 2004 21:39:16 +0200
On Saturday 15 May 2004 19:35, Arkadi Kagan wrote: > Thanks for your answer. > > I checked dmesg and syslog after running modprobe. > > Indeed, in /etc/modules.conf I don`t have sound-slot-1 and > sound-service-1-0.
Sound-slot-1 and sound-service-1-0 are for a second soundcard; the messages are just informational.
> In /proc/modules I don`t have it too. > Instead I have esssolo1 in /proc/modules and alias to in > /etc/modules.conf (sound-slot-0).
Esssolo1 is the OSS driver. You must remove this module before you can use ALSA. Btw, http://www.alsa-project.org/alsa-doc/index.php3?vendor=vendor-ESS_Technology#matrix seems to suggest another driver for the solo 1. Maybe you should try alsaconf to set up your /etc/modules.conf.
> What`s next ? > > > from dmesg: > solo1: version v0.20 time 17:27:43 Mar 13 2003 > PCI: Found IRQ 5 for device 00:0a.0 > solo1: joystick port at 0xe001 > solo1: ddma base address: 0xd800 > ESS Maestro soundcard not found or device busy > > from /var/log/messages: > May 15 13:07:09 arkadi kernel: solo1: version v0.20 time 17:27:43 Mar > 13 2003 > May 15 13:07:09 arkadi kernel: PCI: Found IRQ 5 for device 00:0a.0 > May 15 13:07:09 arkadi kernel: solo1: joystick port at 0xe001 > May 15 13:07:10 arkadi modprobe: modprobe: Can't locate module > sound-slot-1 May 15 13:07:10 arkadi modprobe: modprobe: Can't locate > module sound-service-1-0 > May 15 13:07:10 arkadi modprobe: modprobe: Can't locate module > sound-slot-1 May 15 13:07:10 arkadi modprobe: modprobe: Can't locate > module sound-service-1-0 > > > > From: Frans Ketelaars <[EMAIL PROTECTED]> > > >To: [EMAIL PROTECTED] > >Subject: Re: [Alsa-user] problem with snd-es1968 > >Date: Sat, 15 May 2004 17:50:20 +0200 > > > >On Saturday 15 May 2004 01:55, Arkadi Kagan wrote: > > > Hello. > > > > > > I have a problem to run alsa-driver. > > > When I try '/sbin/insmod snd-es1968', I get unresolved symbols > > > error. /proc/ksyms don`t have nothing close to missing entries. > > > > > > Any advice is wellcome. > > > > > > Thanks. > > > Arkadi. > > > > > > ----------------------------------------------------------------- > > >---- ------------- My hardware: > > > snd-ess solo1 1969 > > > ( I hope it does not go too far from 1968 ) > > > > > > My system: > > > Red-Hat 9. Kernel 2.4.20.8. > > > > > > Driver version: > > > driver "alsa-driver-1.0.4.tar.bz2" > > > utils "alsa-utils-1.0.4.tar.bz2" > > > libs "alsa-lib-1.0.4.tar.bz2" > > > > > > Installation process I tried: > > > ./configure --with-cards=es1968 --with-sequencer=yes > > > ( no errors ) > > > make > > > ( no errors ) > > > su > > > make install > > > ( no errors > > > warning: > > > ----------------------------------------------------------------- > > >---- ---------- WARNING!!! The mixer channels for the ALSA driver > > > are muted by default!!! > > > ***************************************************************** > > >**** ***** You would use some ALSA or OSS mixer to set the > > > appropriate volume. > > > ----------------------------------------------------------------- > > >---- ---------- ) > > > cd ../alsa-lib-1.0.4 > > > ./configure > > > make > > > make install > > > > > > cd ../alsa-utils-1.0.4 > > > ./configure > > > make > > > make install > > > > > > /sbin/modprob snd-es1968 > > > ( > > > error: > > > ----------------------------------------------------------------- > > >---- ---------- > > > /lib/modules/2.4.20-8/kernel/sound/pci/snd-es1968.o: init_module: > > > No such device > > > Hint: insmod errors can be caused by incorrect module parameters, > > > including invalid IO or IRQ parameters. > > > You may find more information in syslog or the output from > > > dmesg /lib/modules/2.4.20-8/kernel/sound/pci/snd-es1968.o: insmod > > > /lib/modules/2.4.20-8/kernel/sound/pci/snd-es1968.o failed > > > /lib/modules/2.4.20-8/kernel/sound/pci/snd-es1968.o: insmod > > > snd-es1968 failed > > > ----------------------------------------------------------------- > > >---- ---------- ) > > > # insmod failed, therefore, I looked on: > > > /sbin/insmod snd-es1968 > > > ( > > > error: > > > ----------------------------------------------------------------- > > >---- ---------- Using > > > /lib/modules/2.4.20-8/kernel/sound/pci/snd-es1968.o > > > /lib/modules/2.4.20-8/kernel/sound/pci/snd-es1968.o: unresolved > > > symbol snd_dma_alloc_pages_fallback_R18d33983 > > > /lib/modules/2.4.20-8/kernel/sound/pci/snd-es1968.o: unresolved > > > symbol snd_mpu401_uart_new_R5fb57a92 > > > /lib/modules/2.4.20-8/kernel/sound/pci/snd-es1968.o: unresolved > > > symbol snd_pcm_suspend_all_R9e381a38 > > > /lib/modules/2.4.20-8/kernel/sound/pci/snd-es1968.o: unresolved > > > symbol snd_dma_set_reserved_R77de065d > > > ><snip> > > > >You must use modprobe to ensure other needed modules are loaded > > first. > > > >The error: > > > >init_module: No such device > > Hint: insmod errors can be caused by incorrect module parameters, > > including invalid IO or IRQ parameters. > > You may find more information in syslog or the output from dmesg > > > >means the driver didn't recognize the card. Did you find more > >information in syslog or the output from dmesg?
HTH,
-Frans
------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail
------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
