On 8/13/06, Bill Unruh <[EMAIL PROTECTED]> wrote: > On Sun, 13 Aug 2006, Jan Matus wrote: > > > Good Day, > > I use Debian unstable. I`m not getting any sound, even though i unmute and > > set up alsamixer. Aplications (Movie player, Rhythmbox, xmms) run normally, > > without error messages, but i still can`t hear anything > > You have the volume turned down. shove up the PCM slider and the Master > Volume. > > The best way to adjust is to push everything up and then find out which do > not bring the volume down when slid down. >
I have tried it before, but it didn`t help. I don`t have Front and Headphones volume slider in my alsamixer. > > > I recompiled my kernel ( 2.6.17.8), installed new alsa driver, lib and utils > > (1.0.12rc2<ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.12rc2.tar.bz2>). > > I was using instructions from > > http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=ATI&card=ATI-IXP+southbridge+HD-audio+and+modem.&chip=SB450&module=hda-intel > > and i also tried advices from > > http://alsa.opensrc.org/hda > > None of it helped me. > > > > Some informations about my laptop(I`ll send more when needed) > > #lspci > > 00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01) > > 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge > > 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller > > (rev 80) > > 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller > > (rev 80) > > 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host > > ControllerI tried (a long time before i wrote this mail) it, but it doesn`t > > work. I haven`t Front and Headphones slider in my alsamixer. > > (rev 80) > > 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82) > > 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE > > Controller ATI (rev 80) > > 00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01) > > 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) > > 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) > > 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress > > 200M] > > 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL-8139/8139C/8139C+ (rev 10) > > 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) > > 02:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter > > (rev 17) > > 02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter > > (rev 08) > > 02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] > > 802.11g Wireless LAN Controller (rev 02) > > > > #lsmod: > > Module Size Used by > > vfat 12736 1 > > fat 52188 1 vfat > > ntfs 105588 0 > > snd_hda_intel 18580 0 > > snd_hda_codec 156656 1 snd_hda_intel > > snd_pcm_oss 43296 0 > > snd_pcm 79624 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss > > snd_timer 23172 1 snd_pcm > > snd_page_alloc 10184 2 snd_hda_intel,snd_pcm > > snd_mixer_oss 17600 1 snd_pcm_oss > > snd 54400 6 > > snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss > > soundcore 9888 1 snd > > radeon 113376 0 > > drm 69908 1 radeon > > parport_pc 35696 1 > > lp 11648 0 > > parport 38728 2 parport_pc,lp > > ide_scsi 16388 0 > > ide_generic 1216 0 [permanent] > > bcm43xx 433448 0 > > usbhid 32964 0 > > firmware_class 10176 1 bcm43xx > > ieee80211softmac 28928 1 bcm43xx > > ide_cd 39712 0 > > ohci_hcd 20932 0 > > ati_agp 8908 0 > > agpgart 31984 2 drm,ati_agp > > cdrom 37296 1 ide_cd > > > > #alasamixer > > Simple mixer control 'Headphone',0 > > Capabilities: pswitch > > Playback channels: Front Left - Front Right > > Mono: > > Front Left: Playback [on] > > Front Right: Playback [on] > > Simple mixer control 'PCM',0 > > Capabilities: pvolume > > Playback channels: Front Left - Front Right > > Limits: Playback 0 - 255 > > Mono: > > Front Left: Playback 26 [10%] > > Front Right: Playback 26 [10%] > > Simple mixer control 'Front',0 > > Capabilities: pswitch > > Playback channels: Front Left - Front Right > > Mono: > > Front Left: Playback [on] > > Front Right: Playback [on] > > Simple mixer control 'Line',0 > > Capabilities: pvolume pswitch > > Playback channels: Front Left - Front Right > > Limits: Playback 0 - 23 > > Mono: > > Front Left: Playback 0 [0%] [- 36.00dB] [on] > > Front Right: Playback 0 [0%] [-36.00dB] [on] > > Simple mixer control 'Mic',0 > > Capabilities: pvolume pswitch > > Playback channels: Front Left - Front Right > > Limits: Playback 0 - 23 > > Mono: > > Front Left: Playback 0 [0%] [-36.00dB] [on] > > Front Right: Playback 0 [0%] [-36.00dB] [on] > > Simple mixer control 'Capture',0 > > Capabilities: cvolume cswitch > > Capture channels: Front Left - Front Right > > Limits: Capture 0 - 13 > > Front Left: Capture 0 [0%] [-6.00dB] [on] > > Front Right: Capture 0 [0%] [-6.00dB] [on] > > Simple mixer control 'Input Source',0 > > Capabilities: enum > > Items: 'Mic' 'Line' > > Item0: 'Mic' > > i am attaching some adddintional information: #dmesg Linux version 2.6.17.8 ([EMAIL PROTECTED]) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #1 PREEMPT Sat Aug 12 15:06:24 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017fd0000 (usable) BIOS-e820: 0000000017fd0000 - 0000000017fde000 (ACPI data) BIOS-e820: 0000000017fde000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98256 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 94160 pages, LIFO batch:31 DMI 2.3 present. ATI board detected. Disabling timer routing over 8254. Allocating PCI resources starting at 20000000 (gap: 18000000:e6e00000) Built 1 zonelists Kernel command line: root=/dev/hda2 ro acpi=off Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1753.012 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 386144k/393024k available (1883k kernel code, 6328k reserved, 611k data, 168k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3390.56 BogoMIPS (lpj=1695282) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000140 0000c109 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping 08 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently PCI: Discovered primary peer bus 06 [IRQ] PCI: Using IRQ router default [1002/4377] at 0000:00:14.3 PCI: Cannot allocate resource region 3 of device 0000:00:00.0 PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: fe100000-fe1fffff PREFETCH window: bdf00000-ddefffff PCI: Bus 3, cardbus bridge: 0000:02:01.0 IO window: 0000a000-0000a0ff IO window: 0000a400-0000a4ff PREFETCH window: 20000000-21ffffff MEM window: 22000000-23ffffff PCI: Bridge: 0000:00:14.4 IO window: a000-bfff MEM window: fe200000-feafffff PREFETCH window: ddf00000-dfefffff NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) 8139cp: pci dev 0000:02:00.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xd8800c00, 00:17:31:94:dd:94, IRQ 4 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ATIIXP: chipset revision 128 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... hda: ST980829A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 > ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 11, io mem 0xfebfd000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb 1-5: new high speed USB device using ehci_hcd and address 3 usb 1-5: configuration #1 chosen from 1 choice usbcore: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to <[EMAIL PROTECTED]> Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 168k freed input: AT Translated Set 2 keyboard as /class/input/input0 Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input1 Linux agpgart interface v0.101 (c) Dave Jones ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 11, io mem 0xfebff000 hdd: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 11, io mem 0xfebfe000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected usb 3-1: new low speed USB device using ohci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice input: Logitech Optical USB Mouse as /class/input/input2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver bcm43xx driver bcm43xx: Chip ID 0x4318, rev 0x2 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7 bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) bcm43xx: Radio turned off bcm43xx: Radio turned off Adding 530136k swap on /dev/hda3. Priority:-1 extents:1 across:530136k EXT3 FS on hda2, internal journal eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). [drm] Initialized drm 1.0.1 20051102 hda_codec: Unknown model for ALC861, trying auto-probe from BIOS... hda-intel: Invalid position buffer, using LPIB read method instead. Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! NTFS driver 2.1.27 [Flags: R/O MODULE]. NTFS volume version 3.1. hdd: status timeout: status=0xd1 { Busy } ide: failed opcode was: unknown hdd: DMA disabled hdd: ATAPI reset complete > > Thank you in advance > > Jan Matuska > > > > -- > William G. Unruh | Canadian Institute for| Tel: +1(604)822-3273 > Physics&Astronomy | Advanced Research | Fax: +1(604)822-5324 > UBC, Vancouver,BC | Program in Cosmology | [EMAIL PROTECTED] > Canada V6T 1Z1 | and Gravity | www.theory.physics.ubc.ca/ > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
