On Thursday 31 August 2006 13:51, Clemens Ladisch wrote: > GGLL wrote: > > I'm trying to build source for ALSA and my Sound Blaster 16, MCD ISA > > (non PnP) card. I try to pass parameter's card (I/O, IRQ, etc) to SB16 > > module as suggested in ALSA-Configuration.txt file, but I'm rejected with > > an "Unknown Parameter..." message during build process, then stops. > > > > ALSA_CARD_OPTIONS="port=0x220, mpu_port=0x330, irq=10, dma8=1, dma16=5, > > mic_agc=1, csp=1, isapnp=0" > > This setting is for special compilation options; do not put module options > in there. > > > HTH > Clemens
Hi Clemens. I don't know which way the OP is going about trying to get the SB16 ISA card setup, but on my machine that has an Ensoniq (ens1371) card on it, I added an old SB16 ISA card. Just running alsaconf picked the card up. Alright it first searched for PCI cards, and then IIRC asked if you wanted to search for other cards, or perhaps it was do a manual search. Anyway alsaconf found the card, and cat /proc/asound/cards shows it as. SB16 0x220,irq5,dma1&5 (irq5 was unused), and the card, even though it's quite old, works just fine, along with the Ensoniq card. This is on FC3. Debian Sarge is on the other machine, which has no ISA slots, so I can't try the SB16 on that, but Sarge has the alsaconf script, so see no reason why the card shouldn't set up ok using the alsaconf script. Nigel. ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
