Hi Andrew,
Andrew Mahone wrote:
> sorry, forgot to check address, and gmail sent the first copy to Simeon :/
>
> So, model=generic is being ignored, then. It doesn't seem to be
> alternating consistently between working and not with module reloads -
> that must have been a fluke. If I just reload until alsactl complains
> about the missing control #3, I get working audio.
>
> Is there any more information that can be gotten from the codec to
> help get it properly supported, or are the contents of my codec#0 the
> best I can get?
Here is some information about the system:
$ cat /proc/asound/card0/codec#0
-----------------------------BEGIN--------------------------------------
Codec: Realtek ALC660
Address: 0
Vendor Id: 0x10ec0861
Subsystem Id: 0x10430605
Revision Id: 0x100340
Default PCM: rates 0x140, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x00]
Power: 0x0
Node 0x06 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x80 0x80]
Power: 0x0
Node 0x07 [Audio Output] wcaps 0x605: Stereo Digital Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Power: 0x0
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x02, nsteps=0x0d, stepsize=0x0b, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
0x80] [0x80 0x80]
PCM: rates 0x140, bits 0x02, types 0x1
Power: 0x0
Connection: 6
0x0d 0x0c* 0x0f 0x10 0x11 0x15
Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x081f: OUT HP Detect
Pin Default 0x99030120: [Fixed] Line Out at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x40: OUT
Power: 0x0
Connection: 1
0x16
Node 0x0c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0837: IN OUT Detect
Pin Default 0x01813140: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Power: 0x0
Connection: 1
0x19
Node 0x0d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x08337: IN OUT Detect
Pin Default 0x01a1994e: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Power: 0x0
Connection: 1
0x18
Node 0x0e [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0817: OUT Detect
Pin Default 0x01214110: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x00:
Power: 0x0
Connection: 1
0x19
Node 0x0f [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0833f: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0xc0: OUT HP
Power: 0x0
Connection: 1
0x1a
Node 0x10 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0833f: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x24: IN
Power: 0x0
Connection: 1
0x1b
Node 0x11 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0863: IN
Pin Default 0x99330141: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x00:
Node 0x12 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x99430130: [Fixed] SPDIF Out at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x07
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x0d 0x10
Node 0x15 [Audio Mixer] wcaps 0x20050f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x0c, nsteps=0x17, stepsize=0x0b, mute=1
Amp-In vals: [0x00 0x00] [0x8e 0x8e] [0x00 0x00]
Amp-Out caps: ofs=0x0c, nsteps=0x0c, stepsize=0x0b, mute=1
Amp-Out vals: [0x0c 0x0c]
Power: 0x0
Connection: 3
0x11 0x14 0x1c
Node 0x16 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x15
Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x04 0x15
Node 0x18 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x05 0x15
Node 0x280a7af8 [ATAPI] wcaps 0x3ca79db8: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x06 0x15
Node 0x1a [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x00 0x00]
Connection: 4
0x04 0x06 0x15 0x03
Node 0x1b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 4
0x04 0x06 0x15 0x03
Node 0x1c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x0c 0x0f
Node 0x1d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1f [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0817: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Power: 0x0
Connection: 1
0x18
Node 0x20 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0817: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x00:
Power: 0x0
Connection: 1
0x17
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x8f]
------------------------------END---------------------------------------
cat /proc/asound/card0/codec#1
-----------------------------BEGIN--------------------------------------
Codec: Generic 1057 ID 3055
Address: 1
Vendor Id: 0x10573055
Subsystem Id: 0x104310c6
Revision Id: 0x100700
------------------------------END---------------------------------------
$ lspci
-----------------------------BEGIN--------------------------------------
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio
(rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Unknown
device 8168 (rev 01)
02:00.0 VGA compatible controller: nVidia Corporation Unknown device
0398 (rev a1)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
(rev 08)
03:01.2 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host
Adapter (rev 17)
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter (rev 08)
03:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One
54g] 802.11g Wireless LAN Controller (rev 02)
------------------------------END---------------------------------------
$ lspci -vv
-----------------------------BEGIN--------------------------------------
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio
(rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device 1367
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at dceb8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] HyperTransport: MSI Mapping
------------------------------END---------------------------------------
$ cat /etc/modprobe.conf
-----------------------------BEGIN--------------------------------------
alias scsi_hostadapter sata_nv
alias eth0 r1000
blacklist bcm43xx
alias snd-card-0 snd-hda-intel
options snd-card-0 index=0
options snd-hda-intel model=3stack-660 index=0
remove snd-hda-intel { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ;
}; /sbin/modprobe -r --ignore-remove snd-hda-intel
------------------------------END---------------------------------------
$ dmesg
-----------------------------BEGIN--------------------------------------
Bootdata ok (command line is ro root=LABEL=/ noapic )
Linux version 2.6.17-1.2174_FC5
([EMAIL PROTECTED]) (gcc version 4.1.1 20060525
(Red Hat 4.1.1-1)) #1 SMP Tue Aug 8 15:30:44 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)
BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
DMI present.
ACPI: RSDP (v000 ACPIAM ) @
0x00000000000fbb90
ACPI: RSDT (v001 A M I OEMRSDT 0x07000604 MSFT 0x00000097) @
0x000000003ffc0000
ACPI: FADT (v002 A M I OEMFACP 0x07000604 MSFT 0x00000097) @
0x000000003ffc0200
ACPI: MADT (v001 A M I OEMAPIC 0x07000604 MSFT 0x00000097) @
0x000000003ffc0390
ACPI: MCFG (v001 A M I OEMMCFG 0x07000604 MSFT 0x00000097) @
0x000000003ffc0400
ACPI: OEMB (v001 A M I AMI_OEM 0x07000604 MSFT 0x00000097) @
0x000000003ffce040
ACPI: DSDT (v001 A0427 A0427000 0x00000000 INTL 0x02002026) @
0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003ffc0000
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000003ffc0000
On node 0 totalpages: 256338
DMA zone: 2385 pages, LIFO batch:0
DMA32 zone: 253953 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:8 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:8 APIC version 16
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: ASUS Product ID: APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Setting APIC routing to physical flat
Processors: 2
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Checking aperture...
CPU 0: aperture @ 1f10000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists
Kernel command line: ro root=LABEL=/ noapic
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 1607.330 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1022420k/1048320k available (2387k kernel code, 25512k reserved,
1700k data, 200k init)
Calibrating delay using timer specific routine.. 3218.77 BogoMIPS
(lpj=6437552)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0(2) -> Node 0 -> Core 0
ACPI Error (psloop-0193): Found unknown opcode FD at AML address
ffffc20000016003 offset 5B9F, ignoring [20060127]
ACPI Error (psloop-0193): Found unknown opcode FD at AML address
ffffc200000160b2 offset 5C4E, ignoring [20060127]
ACPI Error (psloop-0193): Found unknown opcode FD at AML address
ffffc20000016003 offset 5B9F, ignoring [20060127]
ACPI Error (psloop-0193): Found unknown opcode FD at AML address
ffffc200000160b2 offset 5C4E, ignoring [20060127]
ACPI: setting ELCR to 0200 (from 0ca0)
Using local APIC timer interrupts.
result 12557184
Detected 12.557 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
spurious 8259A interrupt: IRQ7.
Calibrating delay using timer specific routine.. 3222.49 BogoMIPS
(lpj=6444984)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1(2) -> Node 0 -> Core 1
AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 462 cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=249
checking if image is initramfs... it is
Freeing initrd memory: 1152k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:02:00.0
PCI: Transparent bridge - 0000:00:10.0
PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try
'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: Embedded Controller [EC0] (gpe 32) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNEA] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNEB] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 5 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:03.0
IO window: c000-cfff
MEM window: dcf00000-dcffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: d000-dfff
MEM window: dd000000-df6fffff
PREFETCH window: c0000000-cfffffff
PCI: Bus 4, cardbus bridge: 0000:03:01.0
IO window: 0000e000-0000e0ff
IO window: 0000e400-0000e4ff
PREFETCH window: da000000-dbffffff
MEM window: 50000000-51ffffff
PCI: Bridge: 0000:00:10.0
IO window: e000-efff
MEM window: df700000-dfffffff
PREFETCH window: da000000-dbffffff
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1157742612.708:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key D4AD441F6DB3F282
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
0000:00:0b.0 OHCI: BIOS handoff failed (BIOS bug ?) 000007b4
PCI: Setting latency timer of device 0000:00:03.0 to 64
pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [TZ00] (33 C)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
NFORCE-MCP51: chipset revision 161
NFORCE-MCP51: not 100% native mode: will probe irqs later
NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST9100824A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63,
UDMA(100)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 >
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
Yenta: CardBus bridge found at 0000:03:01.0 [1043:1367]
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
pcmcia: parent PCI bridge Memory window: 0xdf700000 - 0xdfffffff
pcmcia: parent PCI bridge Memory window: 0xda000000 - 0xdbffffff
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2)
powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 (1075 mV)
powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e (800 mV)
cpu_init done, current fid 0x8, vid 0x11
powernow-k8: ph2 null fid transition 0x8
ACPI wakeup devices:
P0P8 P0P9 RTGB P0PA NSMB USB0 USB2 P0P1 CBC FIRE WLAN HDAC MC97 SLPB
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 200k freed
Write protecting the kernel read-only data: 919k
input: AT Translated Set 2 keyboard as /class/input/input0
SCSI subsystem initialized
libata version 1.20 loaded.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL PROTECTED]
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input1
audit(1157742617.820:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1481 types, 152 bools, 1 sens, 256 cats
security: 58 classes, 43474 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hdc3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1157742618.028:3): policy loaded auid=4294967295
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 7 (level, low)
-> IRQ 7
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 7, io mem 0xdcebfc00
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEA] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:01:00.0 to 64
eth0: Identified chip type is 'RTL8168B/8111B'.
eth0: r10001.03, the Linux device driver for Realtek Ethernet
Controllers at 0xc800, 00:17:31:f3:b6:e5, IRQ 11
eth0: Auto-negotiation Enabled.
BUG: soft lockup detected on CPU#0!
Call Trace: <IRQ> <ffffffff802b2ce8>{softlockup_tick+219}
<ffffffff80296dc1>{update_process_times+66}
<ffffffff8027a0f6>{smp_local_timer_interrupt+35}
<ffffffff8027a79e>{smp_apic_timer_interrupt+65}
<ffffffff8026384b>{apic_timer_interrupt+135} <EOI>
<ffffffff8020c4d5>{__delay+6}
<ffffffff88193086>{:r1000:R1000_READ_GMII_REG+34}
<ffffffff881931cf>{:r1000:r1000_set_speed_duplex+67}
<ffffffff881944d1>{:r1000:r1000_init_one+2298}
<ffffffff80340504>{pci_device_probe+248}
<ffffffff8039bd2c>{driver_probe_device+82}
<ffffffff8039be85>{__driver_attach+134}
<ffffffff8039bdff>{__driver_attach+0}
<ffffffff8039b73e>{bus_for_each_dev+67}
<ffffffff8039b391>{bus_add_driver+126}
<ffffffff8034075a>{__pci_register_driver+101}
<ffffffff802a4b2a>{sys_init_module+171}
<ffffffff80262b0e>{system_call+126}
Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
Driver version:1.03
Released date:2006/05/26
Link Status:Not Linked
I/O Base:0xC800(I/O port)
IRQ:11
sdhci: Secure Digital Host Controller Interface driver, 0.11
sdhci: Copyright(c) Pierre Ossman
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:03:01.2[C] -> Link [LNKD] -> GSI 5 (level, low)
-> IRQ 5
mmc0: SDHCI at 0xdf7ff800 irq 5 PIO
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 11, io mem 0xdcebe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ieee1394: Initialized config rom entry `ip1394'
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNEA] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8774 Tue Aug 1
21:42:17 PDT 2006
usb 2-7: new full speed USB device using ohci_hcd and address 2
usb 2-7: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt 0000:03:01.1[B] -> Link [LNKC] -> GSI 5 (level, low)
-> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]
MMIO=[df7ff000-df7ff7ff] Max Packet=[2048] IR/IT contexts=[4/4]
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 10 (level,
low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:10.1 to 64
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003607b43]
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: AC Adapter [AC0] (off-line)
Asus Laptop ACPI Extras version 0.29
Error calling BSTS
A6T model detected, unsupported, trying default values, supply the
developers with your DSDT
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hdc3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdc2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev hdc1, type vfat), uses genfs_contexts
Adding 2048248k swap on /dev/hdc5. Priority:-1 extents:1 across:2048248k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4095 buckets, 32760 max) - 304 bytes per conntrack
ndiswrapper version 1.18 loaded (preempt=no,smp=yes)
ndiswrapper (load_pe_images:573): fixing KI_USER_SHARED_DATA address in
the driver
ndiswrapper: driver bcmwl5 (Broadcom,02/11/2005, 3.100.64.0) loaded
ACPI: PCI Interrupt 0000:03:03.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
ndiswrapper: using irq 11
------------------------------END---------------------------------------
Best regards,
simeon
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
