Hi Chris,
On Tuesday 27 November 2007 18:59, Chris Stranex wrote:
> I can vouch for the Juli@ working on linux. I've used it before and
> it's been okay EXCEPT the fact that any use of the midi port (even
> connecting something to it with aconnect or qjackctl) caused my system
> to freeze up. Other than that it seemed to work fine.
Tnx for the info. I will never need MIDI, so that's surely not
a problem for me. :-)
Do you happen to know whether the coax digital I/O are transformer
coupled?
An easy way to tell could be to check with a DVM (set to read out
continuity or a low ohm range) whether or not the "ground" of the
SPDIF I/O RCAs are connected to each other and/or analogue grounds.
If they're transformer coupled (and the card properly designed),
for DC they should be insulated from each other as well as from
any other ground (no ground loops to mess things up...).
Ciao,
Paolo.
--
Skype: Paolo.Saggese
http://borex.lngs.infn.it/saggese
You can still escape from the GATES of hell: Use Linux!
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
